MS46121B


MS46121B MS46121B
MS46121B
MS46121B

Shockline™ 1-Port USB VNAs up to 6 GHz

The MS46121B is a series of two PC-controlled 1-Port USB ShockLine™ Vector Network Analyzers with frequency ranges from 40 MHz to 4 GHz and 150 kHz to 6 GHz. The VNAs are packaged in a compact housing and are externally controlled via USB from a user supplied PC running the same Graphical User Interface (GUI) software as the rest of the ShockLine™ family of VNAs.

The MS46121B is ideal for testing 1-port devices in university laboratories and production lines. The combination of small size and good performance make the MS46121B 1-Port VNAs ideal for passive device test applications where low cost, performance and small form factor are desired.

The MS46121B with Option 2 provides a Time Domain Reflectometry (TDR) like display that enables real impedance measurements over frequency. With Option 21, scalar transmission between two to sixteen MS46121B instruments can be performed in various configurations.

Shockline™ 1-Port Highlights

ms46121b_screenshot2
  • Enables multisite testing of 16 DUTs in one single sweep.
  • Direct connection to DUT avoids the need for RF cables resulting in improved measurement stability.
  • PC control takes advantage of external computer processing power and functionality.
  • Compact package allows measurements at hard to reach places.
  • No onboard data storage eliminates the need for data purging in secure applications.
  • Standard bandpass time domain grants easier and faster fault identification
  • A common GUI interface within the ShockLine™ family reduces switching costs between models.
  • Low cost, small and lightweight.

Basic Performance

Parameters / Characteristics Specifications
Analyzer Performance Frequency Options MS46121B-004, 40 MHz to 4 GHz, type N(m) ports
MS46121B-006, 150 kHz to 6 GHz, type N(m) ports
Corrected Directivity 42 dB, typical
Sweep Speed 120 µs / data point, typical
Trace Noise Magnitude: 0.02 dB, typical
Phase Noise: 0.02 degree RMS
General Measurement Parameters S11 and any user-defined combination of a1, b1,1.
Option 21: S|XY| where Y is the source and X is the receiver
Display Graphs Log Magnitude, Phase, Linear Magnitude, Real, Imaginary, SWR, Impedance, Smith Chart, Polar
Measurements Data Points 2 to 20,000 points
Limit Lines Single or segmented. 2 limit lines per trace. 50 segments per trace.
All IFBW settings applicable with Option 21 enabled) 10, 20, 30, 50, 70, 100, 200, 300, 500, 700 Hz
1, 2, 3, 5, 7, 10, 20, 30, 50, 100 kHz
Display Channels ShockLine™ software can control up to 16 MS46121A VNAs at a time, each on an independent channel. Great for making parallel measurements and reducing test time.
Traces A maximum of 16 traces each. A separate memory for each trace can be used to store measurement data for later display or subtraction, addition, multiplication or division with current measurement data. The trace data can be saved and recalled.
Markers 12 markers + 1 reference marker per trace
Display Powerful GUI displayed on user-provided computer.
Temperature Operating Temperature 0 °C to 50 °C
Dimensions 52 mm x 36 mm x 144 mm (HxWxD)
Weight 0.4 kg (0.9 lb)

Options

Options Descriptions
Frequency Options MS46121B-004 40 MHz to 4 GHz, N(m) port
MS46121B-006 150 kHz to 6 GHz, N(m) port
Other Options MS46121B-002 Low Pass Time Domain
MS46121B-021 Scalar Transmission Measurement


Checking with Anritsu...    




Checking with Anritsu...    




Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


MS46122B


MS46122B MS46122B
MS46122B
MS46122B

World´s first series of compact VNAs to 43.5 GHz

The MS46122B is a series of three Compact ShockLine™ USB Vector Network Analyzers. The VNAs are packaged in a compact 1U chassis and are externally controlled via USB from a user supplied PC running the same Graphical User Interface (GUI) software as the rest of the ShockLine™ family of VNAs. The unit also comes standard with 19" rack mount hardware for convenient rack mount installation.

The MS46122B benefits from patented Shockline™ VNA-on-chip technology which simplifies the internal VNA architecture at high frequencies, reduces instrument cost, and enhances accuracy and measurement repeatability. The combination of lower cost, small size and good performance make the MS46122B series VNAs ideal for passive device test applications where performance and small form factor are desired.

Shockline™ Compact VNA Highlights

ms46122b_screenshot2
  • World´s first series of compact VNAs to 43.5 GHz for cost-effective measurements.
  • Small, and lightweight, easily shared between test locations.
  • PC control takes advantage of external computer processing power and functionality.
  • Compact 1U high package for efficient use of bench and rack space.
  • No onboard data storage eliminates the need for data purging in secure applications.
  • Time domain with time gating option grants easier and faster fault identification.
  • A common GUI interface within the ShockLine™ family reduces switching costs between models.
  • Compatibility with the 36585K AutoCal enables fast calibrations up to 40 GHz

Basic Performance

Parameters / Characteristics Specifications
Analyzer Performance Frequency Options MS46122B-010, 1 MHz to 8 GHz, type N(f) ports
MS46122B-020, 1 MHz to 20 GHz, type Ruggedized K(m) ports
MS46122B-040, 1 MHz to 43.5 GHz, type Ruggedized K(m) ports
(Ruggedized K(m) ports are compatible with 3.5 mm and SMA connectors)
Dynamic Range > 110 dB, 14 GHz to 43.5 GHz, typical
Sweep Speed 130 µs / data point, typical
High Level Noise 1 mdB, 20 MHz to 43.5 GHz, typical
General Measurement Parameters Single ended S-Parameters: S11, S21, S12, S22
Mixed-Mode S-Parameters: SDD, SCC, SDC, SCD
User-defined combination: a1, a2, b1, b2, 1
Max Efficiency: kQ product, ηmax
Display Graphs Log Magnitude, Phase, Group Delay, Linear Magnitude, Real, Imaginary, SWR, Impedance, Smith Chart, Polar kQ product and ηmax
Measurements Data Points 2 to 16,001 points
Limit Lines Single or segmented. 2 limit lines per trace. 50 segments per trace.
IF Bandwidth 10, 20, 50, 70, 100, 200, 300, 500, 700 Hz
1, 2, 5, 7, 10, 20, 30, 50, 70, 100, 300 kHz
Display Channels and Traces Up to 16 channels with a maximum of 16 traces each. A separate memory for each trace can be used to store measurement data for later display or subtraction, addition, multiplication or division with current measurement data. The trace data can be saved and recalled.
Markers 12 markers + 1 reference marker per trace
Display Powerful GUI displayed on user-provided computer.
Temperature Operating Temperature 0 °C to 50 °C
Dimensions 61 mm x 328 mm x 198 mm (H x W x D)
Weight < 2.2 kg (< 5 lbs), typical

Options

Options Descriptions
Frequency Options MS46122B-010 1 MHz to 8 GHz, type N(f) ports
MS46122B-020 1 MHz to 20 GHz, type Ruggedized K(m) ports (compatible with 3.5 mm and SMA connectors)
MS46122B-040 1 MHz to 43.5 GHz, type Ruggedized K(m) ports (compatible with 3.5 mm and SMA connectors)
Other Options MS46122B-002 Time Domain with Time Gating


Checking with Anritsu...    




Checking with Anritsu...    




Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


MS46322B


MS46322B MS46322B
MS46322B
MS46322B

The Ideal Choice for Cost-Sensitive Applications

The MS46322B is a series of Economy Shockline™ Vector Network Analyzers with frequency range from 1 MHz to 8/20/43.5 GHz. It is based on patented Shockline™ VNA-on-chip technology, which simplifies the internal VNA architecture at high frequencies, reduces instrument cost, enhances accuracy and minimizes measurement uncertainty.

The MS46322B are all 2-port VNAs packaged in a compact and rugged 2U chassis. The entire series has 130 microseconds per point sweep speed, and better than 100 dB dynamic range to 43.5 GHz, making it suitable for testing passive devices in engineering, manufacturing and cost-sensitive education applications.

Shockline™ Economy VNA Highlights

ms46322b_screenshot2
  • Ideal for testing RF and microwave devices
  • Fast sweep speed and wide dynamic range minimizes production test time
  • Excellent corrected directivity allows for less measurement uncertainty
  • Time domain with time gating option grants easier and faster fault identification
  • The LAN interface for remote control is faster than GPIB
  • A common GUI and SCPI interface within the ShockLine™ family for ease of use
  • USB ports allow for easy connection to peripherals like keyboard and mouse
  • The small 2U packages allows for the efficient use of rack space
  • Compatibility with the 36585K AutoCal enables fast calibrations up to 40 GHz
  • Standard removable hard drive provides additional data security

Basic Performance

Parameters / Characteristics Specifications
Analyzer Performance Frequency Options MS46322B-010, 1 MHz to 8 GHz
MS46322B-020, 1 MHz to 20 GHz
MS46322B-040, 1 MHz to 43.5 GHz
Dynamic Range > 110 dB, 14 GHz to 43.5 GHz, typical
Sweep Speed 130 µs / data point, typical
High Level Noise 1 mdB, 20 MHz to 43.5 GHz, typical
General Measurement Parameters Single ended S-Parameters: S11, S21, S12, S22
Mixed-Mode S-Parameters: SDD, SCC, SDC, SCD
User-defined combination: a1, a2, b1, b2, 1
Max Efficiency: kQ product, ηmax
Display Graphs Log Magnitude, Phase, Group Delay, Linear Magnitude, Real, Imaginary, SWR, Impedance, Smith Chart, Polar kQ product and ηmax
Measurements Data Points 2 to 16,001 points
Limit Lines Single or segmented. 2 limit lines per trace. 50 segments per trace.
IF Bandwidth 10, 20, 50, 70, 100, 200, 300, 500, 700 Hz
1, 2, 5, 7, 10, 20, 30, 50, 70, 100, 300 kHz
Display Channels and Traces Up to 16 channels with a maximum of 16 traces each. A separate memory for each trace can be used to store measurement data for later display or subtraction, addition, multiplication or division with current measurement data. The trace data can be saved and recalled.
Markers 12 markers + 1 reference marker per trace
Display Powerful GUI displayed on user-provided computer.
Temperature Operating Temperature 0 °C to 50 °C
Dimensions 108 mm x 484 mm x 590 mm (H x W x D)
Weight < 11 kg (< 25 lbs), typical

Options

Options Descriptions
Frequency Options MS46322B-010 1 MHz to 8 GHz, type N(f) ports
MS46322B-020 1 MHz to 20 GHz, type Ruggedized K(m) ports (compatible with 3.5 mm and SMA connectors)
MS46322B-040 1 MHz to 43.5 GHz, type Ruggedized K(m) ports (compatible with 3.5 mm and SMA connectors)
Other Options MS46322B-001 Rack mount, adds handles and removes feet for shelf-mounting into a 19 in universal rack
MS46322B-002 Time Domain with Time Gating
Accessories 2000-1858-R Extra external hard drive with preloaded software (For MS46322B only)


Checking with Anritsu...    




Checking with Anritsu...    




Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


MS46522B


MS46522B MS46522B MS46522B
MS46522B
MS46522B
MS46522B

RF and Microwave VNAs to 43.5 GHz

ms46522b_screenshot1

The MS46522B is a series of 2-port Performance ShockLine™ Vector Network Analyzers. Delivering an unprecedented level of value and performance, including best-in-class dynamic range, the MS46522B series lowers cost-of-test and speeds time to market in numerous test applications up to 43.5 GHz. These applications include characterizing and manufacturing mobile network equipment, mobile devices, automotive cables, high-speed data interconnects and system integration components.

The MS46522B configured with option 10, 20, or 40 brings RF to microwave frequency capabilities to the Performance ShockLine™ family. These frequency options, combined with powerful ShockLine™ software, provide a cost effective solution for the most challenging, passive device testing.

The MS46522B series comes in a 3U high chassis and uses the same GUI, software, command syntax, drivers, and programming environments as the rest of the ShockLine™ family.

Shockline™ Performance VNA Highlights

ms46522b_screenshot2
  • High output power allows measurement of high attenuation devices.
  • Industry leading dynamic range enables measurement of very low reflection artifacts.
  • Excellent corrected directivity minimizes measurement uncertainty.
  • SmartCal auto calibration unit reduces calibration and setup time.
  • Time domain with time gating option grants easier and faster fault identification.
  • Modern LAN interface for remote control is faster than GPIB.
  • A common GUI and SCPI interface within the Shockline™ Family for ease of use.
  • USB ports allow for easy connection to peripherals like keyboard and mouse.
  • The small 3U packages allows for the efficient use of rack space

Basic Performance

Parameters / Characteristics Specifications
Analyzer Performance Frequency Options MS46522B-010, 50 kHz to 8.5 GHz
MS46522B-020, 50 kHz to 20 GHz
MS46522B-040, 50 kHz to 43.5 GHz
MS46522B-082, 55 GHz to 92 GHz
Dynamic Range > 120 dB, 40 GHz to 43.5 GHz, typical
High Level Noise 2 mdB, 40 MHz to 43.5 GHz, typical
General Measurement Parameters Single ended S-Parameters: S11, S21, S12, S22
Mixed-Mode S-Parameters: SDD, SCC, SDC, SCD
User-defined combination: a1, a2, b1, b2, 1
Max Efficiency: kQ product, ηmax
Display Graphs Log Magnitude, Phase, Group Delay, Linear Magnitude, Real, Imaginary, SWR, Impedance, Smith Chart, Polar kQ product and ηmax
Measurements Data Points 2 to 20,001 points
Limit Lines Single or segmented. 2 limit lines per trace. 50 segments per trace.
IF Bandwidth 10, 20, 30, 50, 70, 100, 200, 300, 500, 700 Hz
1, 2, 3, 5, 7, 10, 20, 30, 70, 100, 200, 300, 500 kHz
Display Channels and Traces Up to 16 channels with a maximum of 16 traces each. A separate memory for each trace can be used to store measurement data for later display or subtraction, addition, multiplication or division with current measurement data. The trace data can be saved and recalled.
Markers 12 markers + 1 reference marker per trace
Display Powerful GUI displayed on user-provided computer.
Temperature Operating Temperature 0 °C to 50 °C
Dimensions 152 mm x 445 mm x 442 mm (H x W x D)
Weight < 11 kg (< 25 lb), typical for MS46522B-010 VNA
< 13 kg (< 28 lb), typical for MS46522B-020 or MS46522B-040 VNA

Options

Options Descriptions
Frequency Options MS46522B-010 50 kHz to 8.5 GHz
MS46522B-020 50 kHz to 20 GHz
MS46522B-040 50 kHz to 43.5 GHz
MS46522B-082 50 kHz to 92 GHz
Other Options MS46522B-001 Rack mount, adds handles and removes feet for shelf-mounting into a 19 in. universal rack
MS46522B-002 Time domain with time gating
MS46522B-022 Advanced Time Domain
MS46522B-051 Direct Access loops (Source 1, 2 and b1, b2) (For MS46522B units with Option 10 only)
MS46522B-061 Bias Tees (Port 1 and 2) (For MS46522B units with Option 10 only)


Checking with Anritsu...    




Checking with Anritsu...    




Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


MS46524B


MS46524B MS46524B MS46524B
MS46524B
MS46524B
MS46524B

RF and Microwave VNAs to 43.5 GHz

ms46524b_screenshot1

The MS46524B is a series of 4-port Performance ShockLine™ Vector Network Analyzers. Delivering an unprecedented level of value and performance, including best-in-class dynamic range, the Performance series lowers cost-of-test and speeds time to market in numerous test applications up to 43.5 GHz. These applications include characterizing and manufacturing, multi-port mobile network equipment, mobile devices, automotive cables, high-speed data interconnects and system integration components.

The MS46524B configured with option 10, 20, or 40 brings RF to microwave frequency capabilities to the Performance ShockLine™ family. These frequency options, combined with powerful ShockLine™ software, provide a cost effective solution for the most challenging, passive device testing.

The MS46524B series comes in a 3U high chassis and uses the same GUI, software, command syntax, drivers, and programming environments as the rest of the ShockLine™ family

Shockline™ Performance VNA Highlights

ms46524b_screenshot2
  • Ideal for testing single-ended and multi-port RF devices.
  • Industry leading dynamic range enables measurement of very low reflection artifacts.
  • Excellent corrected directivity minimizes measurement uncertainty.
  • Time domain with gating option grants easier and faster fault identification.
  • Modern LAN interface for remote control is faster than GPIB.
  • A common GUI and SCPI interface within the ShockLine™ family.
  • USB ports allow for easy connection to peripherals like keyboard and mouse.
  • The compact 3U high packages allows for the efficient use of rack space.

Basic Performance

Parameters / Characteristics Specifications
Analyzer Performance Frequency Options MS46524B-010, 50 kHz to 8.5 GHz
MS46524B-020, 50 kHz to 20 GHz
MS46524B-040, 50 kHz to 43.5 GHz
Dynamic Range > 120 dB, 40 GHz to 43.5 GHz, typical
High Level Noise 2 mdB, 40 MHz to 43.5 GHz, typical
General Measurement Parameters 16 single-ended S-parameters, and any user-defined combination of a1-4, b1-4, 1. 16 mixed-mode S-parameters (DD, CC, DC, CD); uses the superposition technique Maximum Efficiency Analysis
Display Graphs Log Magnitude, Phase, Group Delay, Linear Magnitude, Real, Imaginary, SWR, Impedance, Smith Chart, Polar kQ product and ηmax
Measurements Data Points 2 to 20,001 points
Limit Lines Single or segmented. 2 limit lines per trace. 50 segments per trace.
IF Bandwidth 10, 20, 30, 50, 70, 100, 200, 300, 500, 700 Hz
1, 2, 3, 5, 7, 10, 20, 30, 70, 100, 200, 300, 500 kHz
Display Channels and Traces Up to 16 channels with a maximum of 16 traces each. A separate memory for each trace can be used to store measurement data for later display or subtraction, addition, multiplication or division with current measurement data. The trace data can be saved and recalled.
Markers 12 markers + 1 reference marker per trace
Display Powerful GUI displayed on user-provided computer.
Temperature Operating Temperature 0 °C to 50 °C
Dimensions 152 mm x 445 mm x 442 mm (H x W x D)
Weight < 13.6 kg (< 30 lb), typical for MS46524B-010 VNA
< 15.9 kg (< 35 lb), typical for MS46524B-20 or MS46524B-040 VNA

Options

Options Descriptions
Frequency Options MS46524B-010 50 kHz to 8.5 GHz
MS46524B-020 50 kHz to 20 GHz
MS46524B-040 50 kHz to 43.5 GHz
Other Options MS46524B-001 Rack mount, adds handles and removes feet for shelf-mounting into a 19 in. universal rack
MS46524B-002 Time domain with time gating
MS46524B-022 Advanced Time Domain
MS46524B-051 Direct Access loops (Source 1, 2 and b1, b2) (For MS46524B units with Option 10 only)
MS46524B-061 Bias Tees (Port 1, 2, 3, and 4) (For MS46524B units with Option 10 only)


Checking with Anritsu...    




Checking with Anritsu...    




Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


MS4640B/ MS4642B/ MS4644B/ MS4647B


MS464xB MS464xB MS464xB
MS464xB
MS464xB
MS464xB

Broadest Frequency Span from A Single Coaxial Test Port Covering 70 kHz to 70 GHz

The VectorStar™ family is Anritsu's Premium VNA line, providing the highest overall performance on a modern platform. The MS4640B VectorStar™ VNA offers the broadest coverage in a single instrument, 70 kHz to 70 GHz. The additional two decades at the low end are even more impressive than the guaranteed 70 GHz coverage on the high end.

Highest Performance Pulse Measurements with PulseView™

PulseView™, when combined with the innovative IF digitizing option, offers industry-leading 2.5 ns pulse resolution and 100 dB dynamic range with no compromises or trade-offs due to varying duty cycles. PulseView™ provides real time display of pulse measurements while dynamically modifying pulse parameters for immediate design validation.

4-port Single-ended or Balanced Measurements using DifferentialView™ Analysis

DifferentialView™, when combined with the dual internal source option, offers real time display analysis of differential devices, drivers, and components while actively modifying phase and magnitude relationships of the internal dual sources.

Broadband Noise Figure Measurements from 70 kHz to 125 GHz

The noise figure option is based on a cold source technique for improved noise figure measurement accuracy. VectorStar™ is the only VNA platform capable of measuring noise figure from 70 kHz to 125 GHz and available with an optimized noise receiver for measurements from 30 GHz to 125 GHz.

Upgrade the VectorStar™ MS464xB VNAs to the Broadband Performance of ME7838A

Upgrade paths available to expand VectorStar™ MS464xB VNAs to the broadband performance of ME7838A.


Basic Performance

Parameters / Characteristics Specifications
Frequency Range 10 MHz to 20 GHz (MS4642B)
10 MHz to 40 GHz(MS4644B)
10 MHz to 70 GHz (MS4647B)
Resolution 1 Hz
Output Level Setting Range MS4642B, 20 GHz model, standard no-options
  -25 to +10 dBm (70 kHz < f ≤ 10 MHz)
  -25 to +12 dBm (10 MHz < f ≤ 2.5 GHz)
  -20 to +13 dBm (2.5 GHz < f ≤ 20 GHz)
MS4644B, 40 GHz model, standard option
  -25 to +10 dBm (70 kHz < f ≤ 10 MHz)
  -25 to +12 dBm (10 MHz < f ≤ 2.5 GHz)
  -20 to +9 dBm (2.5 GHz < f ≤ 20 GHz)
  -25 to +9 dBm (20 GHz < f ≤ 40 GHz)
MS4647B, 70 GHz model, standard no-options
  -25 to +10 dBm (70 kHz < f ≤ 10 MHz)
  -25 to +12 dBm (10 MHz < f ≤ 2.5 GHz)
  -20 to +6 dBm (2.5 GHz < f ≤ 5 GHz)
  -20 to +5 dBm (5 GHz < f ≤ 20 GHz)
  -25 to +6 dBm (20 GHz < f ≤ 38 GHz)
  -25 to +5 dBm (38 GHz < f ≤ 50 GHz)
  -25 to 0 dBm (50 GHz < f ≤ 65 GHz)
  -25 to -2 dBm (65 GHz < f ≤ 67 GHz)
  -25 to -3 dBm (67 GHz < f ≤ 70 GHz)
Accuracy Measured at default power level
±1.5 dB (70 kHz < f < 10 MHz)
±1.5 dB (10 MHz ≤ f ≤ 40 GHz)
±3.0 dB (40 GHz ≤ f ≤ 67 GHz)
±4.0 dB (67 GHz ≤ f ≤ 70 GHz)
Linearity Measured between default and 5 dB below default port power
±1.5 dB (70 kHz < f < 10 MHz)
±1.0 dB (10 MHz ≤ f ≤ 40 GHz)
±1.0 dB (40 GHz ≤ f ≤ 67 GHz)
±2.0 dB (67 GHz ≤ f ≤ 70 GHz)
Resolution 0.01 dB
Signal Purit Spurious / Harmonics < -20 dBc
Spurious / Non-harmonics Measured at default power, &ge 1 kHz offset
< -20 dBc (70 kHz ≤ f ≤ 10 MHz)
< -30 dBc (10 MHz ≤ f ≤ 70 GHz)
SSB Phase Noise CW, 10 kHz offset
< -78 dBc/Hz (70 kHz < f ≤ 10 MHz)
< -84 dBc/Hz (10 MHz < f ≤ 5 GHz)
< -78 dBc/Hz (5 GHz < f ≤ 10 GHz)
< -72 dBc/Hz (10 GHz < f ≤ 20 GHz)
< -66 dBc/Hz (20 GHz < f ≤ 40 GHz)
< -61 dBc/Hz (40 GHz < f ≤ 70 GHz)

Options

Options Descriptions
Basic Hardware MS4642B VNA, 10 MHz to 20 GHz, 2-port, K(male)
MS4644B VNA, 10 MHz to 40 GHz, 2-port, K(male)
MS4647B VNA, 10 MHz to 70 GHz, 2-port, V(male)
Other Options Option 001 Rack Mount
Option 002 Time Domain with advanced capabilities
Option 007 Receiver Offset with Multiple Source Control for frequency-translated measurements
Option 008 Active Measurements Suite 2 Attenuators, 2 Bias Tees, Noise Figure, Receiver Offset and 70 kHz low-end frequency extension
Option 009 Active Measurements Suite 4 Attenuators, 2 Bias Tees, Noise Figure, Receiver Offset and 70 kHz low-end frequency extension
Option 021 Universal Fixture Extraction
Option 031 Dual Source
Option 032 Internal Combiner
Option 035 IF Digitizer
Option 036 Extended Memory (Must be purchased with Option 35)
Option 041 Noise Figure
Option 042 PulseView™
Option 043 DifferentialView™
Option 044 IMDView™
Option 046 Fast CW
Option 047 Eye Diagram
Option 05x Direct Access Loops for total measurement flexibility
Option 06x Active Measurement Suites with 2 or 4 attenuators
Option 070 70 kHz Low-end Frequency Extension for an unprecedented frequency coverage
Option 08x Broadband/Milllimeter Wave Interface
MN469xC 4-port Test Sets, K and V for 70 kHz to 70 GHz multi-port solutions
MN4765B O/E Calibration Module. Options available for 70 GHz and 110 GHz, 1310 and 1550 nm measurements


Checking with Anritsu...    




Checking with Anritsu...    




Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


ME7838A/E/D


ME7838A/E/D ME7838A/E/D ME7838A/E/D
ME7838A/E/D
ME7838A/E/D
ME7838A/E/D
me7838aed_screenshot

The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, 125, and 145 GHz with mmWave bands to 1.1 THz.

  • The ME7838A or E version can easily be upgraded to 145 GHz
  • All versions may be configured to include banded millimeter-wave modules up to 1.1 THz
  • Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs.
  • All versions support the 3744x-Rx receiver for noise figure measurements to 125 GHz.
  • Compact, lightweight mmWave modules (0.6 lb vs 7+ lbs and 1/50 the volume) offer low cost installation on smaller probe stations.

Other Key Features

  • The first millimeter-wave system with real time electronic power leveling eliminating power correction time lag found on alternative systems using software correction feedback
  • Provides accurate, stable power control with widest power sweep for safe, accurate gain compression measurements.
  • 4 port test set (MN4697C) and master mm-wave test set (3736B) can be added to standard 2 port system for 4 port operation.
  • No need to purchase expensive 4 port test sets initially - upgrade the VectorStar mm-wave system when needed and budget permits.

Basic Performance

Parameters / Characteristics Specifications
ME7838A ME7838E ME7838D
Frequency Range 70 kHz to 110 GHz 70 kHz to 110 GHz 70 kHz to 145 GHz
Resolution 1 Hz
Output Level Accuracy (Accuracy is defined at –10 dBm or max rated power, whichever is lower) ±1.5 dB (70 kHz < f < 10 MHz)
±1.0 dB (10 MHz ≤ f ≤ 24 GHz)
±1.5 dB (24 GHz ≤ f ≤ 54 GHz)
±2.0 dB (54 GHz ≤ f ≤ 95 GHz)
±3.0 dB (95 GHz ≤ f ≤ 110 GHz)
±4.0 dB (110 GHz ≤ f ≤ 125 GHz)
±1.5 dB (70 kHz < f < 10 MHz)
±1.0 dB (10 MHz ≤ f ≤ 24 GHz)
±1.5 dB (24 GHz ≤ f ≤ 54 GHz)
±2.0 dB (54 GHz ≤ f ≤ 95 GHz)
±3.0 dB (95 GHz ≤ f ≤ 110 GHz)
±1.5 dB (70 kHz < f < 10 MHz)
±1.0 dB (10 MHz ≤ f ≤ 24 GHz)
±1.5 dB (24 GHz ≤ f ≤ 54 GHz)
±2.0 dB (54 GHz ≤ f ≤ 95 GHz)
±3.0 dB (95 GHz ≤ f ≤ 110 GHz)
±4.0 dB (110 GHz ≤ f ≤ 125 GHz)
±5.0 dB (125 GHz ≤ f ≤ 145 GHz)
Linearity (Linearity is defined as the incremental error between the accuracy test power level and 5 dB below) ±1.5 dB (70 kHz < f < 10 MHz)
±1.0 dB (10 MHz ≤ f ≤ 54 GHz)
±1.5 dB (54 GHz ≤ f ≤ 95 GHz)
±2.0 dB (95 GHz ≤ f ≤ 110 GHz)
±3.0 dB (110 GHz ≤ f ≤ 125 GHz)
±1.5 dB (70 kHz < f < 10 MHz)
±1.0 dB (10 MHz ≤ f ≤ 54 GHz)
±1.5 dB (54 GHz ≤ f ≤ 95 GHz)
±2.0 dB (95 GHz ≤ f ≤ 110 GHz)
±1.5 dB (70 kHz < f < 10 MHz)
±1.0 dB (10 MHz ≤ f ≤ 54 GHz)
±1.5 dB (54 GHz ≤ f ≤ 95 GHz)
±2.0 dB (95 GHz ≤ f ≤ 110 GHz)
±3.0 dB (110 GHz ≤ f ≤ 125 GHz)
±4.0 dB (125 GHz ≤ f ≤ 145 GHz)
Resolution 0.01 db

Options

Options Descriptions
Basic Hardware ME7838A 70 kHz to 110 GHz, operational 40 kHz to 125 GHz, Broadband VNA, 1 mm coax output
ME7838E 70 kHz to 110 GHz, Broadband VNA, 1 mm coax output
ME7838D 70 kHz to 145 GHz, Broadband VNA, 0.8 mm coax output


Checking with Anritsu...    




Checking with Anritsu...    




Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


ME7838A4


ME7838A4 ME7838A4
ME7838A4
ME7838A4
me7838a4_screenshot

The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, 125, and 145 GHz with mmWave bands to 1.1 THz.

  • The ME7838A4 system is a 4 port 70 kHz - 110/125 GHz broadband system.
  • The system may be configured to include banded millimeter-wave modules up to 1.1 THz
  • Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs.
  • The system also supports the 3744x-Rx receiver for noise figure measurements to 125 GHz
  • Compact, lightweight mmWave modules (0.6 lb vs 7+ lbs and 1/50 the volume) offer low cost installation on smaller probe stations.

Other Key Features

  • Widest broadband frequency coverage for best device characterization accuracy - 70 kHz to 110 GHz (40 kHz to 125 GHz operational).
  • Industry-best dynamic range for best accuracy - 107 dB at 110 GHz.
  • Industry-best calibration and measurement stability minimizes the need for recalibration.
  • The first millimeter-wave system with real time electronic power leveling eliminating power correction time lag found on alternative systems using software correction feedback. Provides accurate, stable power control with widest power sweep for safe, accurate gain compression measurements.
  • 3743A mm-wave module uses same Nonlinear Transmission Line technology found in VectorStar harmonic sampler offering excellent raw performance.
  • Compact, lightweight mm-wave modules for easy, precise, and economical positioning on the wafer probe station - 0.6 lb and 1/50 the volume. Four port configuration can be installed on smaller economical probe stations.
  • 4 port test set (MN4697C) and the master test set (3736B) can be added to standard 2 port broadband system. No need to purchase expensive 4 port test sets initially - upgrade the VectorStar Broadband system when needed and budget permits.

Basic Performance

Parameters / Characteristics Specifications
Frequency Range 70 kHz to 110 GHz (operational 40kHz to 125 GHz)
Resolution 1 Hz
Output Level Setting Range -25 to +10 dBm (70 kHz < f ≤ 2.5 GHz)
-25 to 0 dBm (2.5 GHz < f ≤ 24 GHz)
-30 to -4 dBm (24 GHz < f ≤ 54 GHz)
-55 to -4 dBm (54 GHz < f ≤ 60 GHz)
-55 to +1 dBm (60 GHz < f ≤ 67 GHz)
-55 to -2 dBm (67 GHz < f ≤ 80 GHz)
-55 to -6 dBm (80 GHz < f ≤ 85 GHz)
-55 to -4 dBm (85 GHz < f ≤ 90 GHz)
-55 to -2 dBm (90 GHz < f ≤ 95 GHz)
-55 to 0 dBm (95 GHz < f ≤ 105 GHz)
-50 to -3 dBm (105 GHz < f ≤ 110 GHz)
Accuracy Measured at default power level
±1.5 dB (70 kHz < f < 10 MHz)
±1.0 dB (10 MHz ≤ f ≤ 24 GHz)
±1.5 dB (24 GHz ≤ f ≤ 54 GHz)
±2.0 dB (54 GHz ≤ f ≤ 95 GHz)
±3.0 dB (95 GHz ≤ f ≤ 110 GHz)
±4.0 dB (110 GHz ≤ f ≤ 125 GHz)
Linearity Measured at default power level
±1.5 dB (70 kHz < f < 10 MHz)
±1.0 dB (10 MHz ≤ f ≤ 54 GHz)
±1.5 dB (54 GHz ≤ f ≤ 95 GHz)
±2.0 dB (95 GHz ≤ f ≤ 110 GHz)
±3.0 dB (110 GHz ≤ f ≤ 125 GHz)
Resolution 0.01 dB

Options

Options Descriptions
Basic Hardware ME7838A 70 kHz to 110 GHz, operational 40 kHz to 125 GHz, Broadband VNA, 1 mm coax output
ME7838E 70 kHz to 110 GHz, Broadband VNA, 1 mm coax output
ME7838D 70 kHz to 145 GHz, Broadband VNA, 0.8 mm coax output
ME7838A4 70 kHz to 110 GHz, operational to 40 kHz to 125 GHz, 4 Port Broadband VNA, 1 mm coax output


Checking with Anritsu...    




Checking with Anritsu...    




Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


MS2026C/ MS2027C/ MS2028C


MS202xC MS202xC MS202xC
MS202xC
MS202xC
MS202xC

The Grand Master of Handheld S-Parameters

The title "Grand Master" suggests the ultimate level of skill, experience, accomplishment and recognition. The VNA Master™ MS202xC/3xC series truly embodies this distinction among Vector Network Analyzers, offering unmatched performance in a handheld solution for 2-port, 2-path measurements, anytime, anywhere. The VNA Master™ specifically addresses complex cable, waveguide and antenna measurement needs in the field with accurate, vector corrected 2-port magnitude, phase, and Time or Distance Domain measurements.

Vector Analyzer Key Features

ms202xc_features
  • True 2-Path 2-Port fully-reversing VNA; measures and displays all S-parameters with a single connection.
  • 5 kHz to 6/15/20 GHz; the industry´s first 20 GHz handheld VNA.
  • Ultra-fast 350 µsec/data point sweep speed, ideal for filter tuning with ultimate flexibility in the number of points from 2 to 4001.
  • 12-term error correction algorithm.
  • Vector Voltmeter option, ideal for cable phase matching.
  • Time Domain option for precise Time or Distance Domain diagnostics, includes Gated Time Domain, LP Processing, and Phasor Impulse mode.

2 Port Vector Network Analyzer

VNA Master™ features a 2-port Vector Network Analyzer to be able to test and verify the performance of feedline, filtering, and antenna components. This includes:

  • Connectors
  • Cables/Jumpers
  • Antenna Isolators
  • Multicouplers/Diplexers/Duplexers
  • Tower Mounted Amplifiers
  • Waveguides/Couplers/Feedhorns

2-port Transmission Measurements can help identify poor filter adjustment, antenna isolation, and degraded tower mounted amplifiers. The goal of these measurements is to maximize the system coverage and capacity with problem-free base stations.

Antenna System Failure Mechanisms

Maintenance is an on going requirement as antenna system performance can degrade at any point in time due to:

  • Loose connectors
  • Debris in waveguides
  • Improperly weatherized connectors
  • Pinched cables
  • Poor grounding
  • Corroded connectors
  • Lightning strikes
  • Strong winds misaligning antennas
  • Water intrusion into cables and waveguides
  • Bullet holes, nails, or rodent damage to the cable

Making Measurements Easier

The VNA Master™ provides features for making measurements easier to perform and for analyzing test results such as:

  • Fast sweep speed, measurement point selection, and flexible display formats make it easy to view and adjust base station RF system performance.
  • High RF Immunity mode for testing in harsh RF environments.
  • Trace Overlay compares reference traces to see changes over time.
  • Limit Lines and Alarming for providing reference standards.
  • High and Low Power output selection to test tower-top components without climbing the tower.
  • Internal Bias-Tee to power up TMAs for testing when off-line.
  • GPS tagging of data to verify location of tests.

ms202xc_quadrature_display ms202xc_time_domain

VNA Performance Specifications

Parameters / Characteristics Specifications
Frequency Range MS2026C/36C: 5 kHz to 6 GHz
MS2027C/37C: 5 kHz to 15 GHz
MS2028C/38C: 5 kHz to 20 GHz
Accuracy ±1.5 ppm
Resolution 1 Hz to 375 MHz, 10 Hz to 6 GHz, and 100 Hz to 20 GHz
Dynamic Range All Models: 100 dB (> 2 MHz - 3 GHz)
All Models: 90 dB (> 3 GHz - 6 GHz)
MS20X7C, MS20X8C: 85 dB (> 6 GHz - 20 GHz)
Sweep Speed (Typical) 350 μs/point (5 kHz to 6 GHz)
> 650 μs/point (6 GHz to 20 GHz)
Directivity All Models: > 42 dB up to 6 GHz
MS20X7C, MS20X8C: > 33 dB up to 20 GHz
Noise Floor (Typical, 10 Hz IFBW) –85 dBm (5 kHz to 2 MHz)
–100 dBm (> 2 MHz to 3 GHz) 
–96 dBm (> 3 GHz to 6 GHz) 
–91 dBm (> 6 GHz to 20 GHz)
General Dimensions 211 mm x 315 mm x 78 mm (8.3 in x 12.4 in x 3.1 in) (MS202xC models)
211 mm x 315 mm x 97 mm (8.3 in x 12.4 in x 3.8 in) (MS203xC models)
Weight 4.5 kg (9.9 lbs) (MS202xC models)
4.8 kg (10.5 lbs) (MS203xC models)

Options

Options Descriptions
Hardware Options
(MS2026C)
MS2026C-0002 Time Domain (includes Option 0501, Distance Domain)
MS2026C-0005 Power Monitor (requires external detector)
MS2026C-0007 Secure Data Operation
MS2026C-0010 Built-in Variable Voltage Bias Tee
MS2026C-0015 Vector Voltmeter
MS2026C-0019 High Accuracy Power Meter (Requires USB Sensors, sold separately)
MS2026C-0031 GPS Receiver (requires GPS antenna, sold separately)
MS2026C-0077 Balanced/Differential S-Parameters, 1-port
MS2026C-0501 Distance-to-Fault
MS2026C-0098 Z-540 Calibration
MS2026C-0099 Premium Calibration
Hardware Options
(MS2027C)
MS2027C-0002 Time Domain (includes Option 0501, DTF)
MS2027C-0005 Power Monitor (requires external detector)
MS2027C-0007 Secure Data Operation
MS2027C-0010 Built-in Variable Voltage Bias Tee
MS2027C-0011 K(f) Test Port Connector
MS2027C-0015 Vector Voltmeter
MS2027C-0019 High Accuracy Power Meter (Requires USB Sensors, sold separately)
MS2027C-0031 GPS Receiver (requires GPS antenna, sold separately)
MS2027C-0077 Balanced/Differential S-Parameters, 1-port
MS2027C-0501 Distance Domain
MS2027C-0098 Z-540 Calibration
MS2027C-0099 Premium Calibration
Hardware Options
(MS2028C)
MS2028C-0002 Time Domain (includes Option 0501, DTF)
MS2028C-0005 Power Monitor (requires external detector)
MS2028C-0007 Secure Data Operation
MS2028C-0010 Built-in Variable Voltage Bias Tee
MS2028C-0011 K(f) Test Port Connector
MS2028C-0015 Vector Voltmeter
MS2028C-0019 High Accuracy Power Meter (Requires USB Sensors, sold separately)
MS2028C-0031 GPS Receiver (requires GPS antenna, sold separately)
MS2028C-0077 Balanced/Differential S-Parameters, 1-port
MS2028C-0501 Distance Domain
MS2028C-0098 Z-540 Calibration
MS2028C-0099 Premium Calibration


Checking with Anritsu...    




Checking with Anritsu...    




Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


MS2036C/ MS2037C/ MS2038C


MS203xC MS203xC MS203xC
MS203xC
MS203xC
MS203xC

The Grand Master of Handheld S-Parameters

The title "Grand Master" suggests the ultimate level of skill, experience, accomplishment and recognition. The VNA Master™ MS202xC/3xC series truly embodies this distinction among Vector Network Analyzers, offering unmatched performance in a handheld solution for 2-port, 2-path measurements, anytime, anywhere.

The VNA Master™ specifically addresses complex cable, waveguide and antenna measurement needs in the field with accurate, vector corrected 2-port magnitude, phase, and Time or Distance Domain measurements. The MS203xC models also offer a high-performance spectrum analyzer with ultra-low noise floor. Based on Anritsu´s industryleading handheld platform, the VNA Master™ offers unmatched measurement breadth, depth, and precision; reducing the number of different tools needed to analyze modern communication systems on land, sea, air and in space.

Key Features

Vector Analyzer Key Features

  • True 2-Path 2-Port fully-reversing VNA; measures and displays all S-parameters with a single connection.
  • 5 kHz to 6/15/20 GHz; the industry´s first 20 GHz handheld VNA.
  • Ultra-fast 350 µsec/data point sweep speed, ideal for filter tuning with ultimate flexibility in the number of points from 2 to 4001.
  • 12-term error correction algorithm.
  • Vector Voltmeter option, ideal for cable phase matching.
  • Time Domain option for precise Time or Distance Domain diagnostics, includes Gated Time Domain, LP Processing, and Phasor Impulse mode.

+ Spectrum Analyzer Key Features

  • 9 kHz to 9/15/20 GHz.
  • Detectors: Peak, Negative, Sample, Quasi-peak, and RMS.
  • Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas.
  • Interference Analyzer Option: Spectrogram, Signal Strength, RSSI.
  • AM/FM/PM Modulation Analyzer Option: Carrier Power, Center Frequency, Occupied Bandwidth, Audio Waveform & Spectrum, Deviation, SINAD, THD.

Simple but Powerful

The goal of Spectrum Analyzer measurements is to accurately monitor, measure, and analyze RF signals and their environments. It finds rouge signals, measures carriers and distortion, and verifies base stations´ signal performance. It validates carrier frequency and identifies desired and undesired signals.

The VNA Master™ MS203xC models feature the most powerful handheld spectrum analyzer in their class with unmatched performance in:

  • Sensitivity
  • Dynamic Range
  • Phase Noise
  • Frequency Accuracy
  • Sweep Speed

The VNA Master™ offers full control over bandwidth and sweep settings, or can be set to automatically optimize for best possible trade-off between accuracy and speed.


ms203xc_sweep_speed ms203xc_auto_measurements

GPS-Enhanced Frequency Accuracy

With GPS Option 31 the spectrum analyzer frequency accuracy (for MS203xC models) is improved to 25 ppb (parts per billion) while the GPS is locked. After 3 minutes of GPS lock, the GPS antenna can be removed and the MS203xC will maintain 50 ppb frequency accuracy for up to 72 hours.

Rx Noise Floor Testing

The VNA Master™ can measure the receive noise floor on a base station´s uplink channel using the channel power measurement. An elevated noise floor indicates interference that can lead to call blocking, denial of service, call drops, low data rates, and lowered system capacity.


VNA Performance Specifications

Parameters / Characteristics Specifications
Frequency Range MS2026C/36C: 5 kHz to 6 GHz
MS2027C/37C: 5 kHz to 15 GHz
MS2028C/38C: 5 kHz to 20 GHz
Accuracy ±1.5 ppm
Resolution 1 Hz to 375 MHz, 10 Hz to 6 GHz, and 100 Hz to 20 GHz
Dynamic Range All Models: 100 dB (> 2 MHz - 3 GHz)
All Models: 90 dB (> 3 GHz - 6 GHz)
MS20X7C, MS20X8C: 85 dB (> 6 GHz - 20 GHz)
Sweep Speed (Typical) 350 μs/point (5 kHz to 6 GHz)
> 650 μs/point (6 GHz to 20 GHz)
Directivity All Models: > 42 dB up to 6 GHz
MS20X7C, MS20X8C: > 33 dB up to 20 GHz
Noise Floor (Typical, 10 Hz IFBW) –85 dBm (5 kHz to 2 MHz)
–100 dBm (> 2 MHz to 3 GHz) 
–96 dBm (> 3 GHz to 6 GHz) 
–91 dBm (> 6 GHz to 20 GHz)
General Dimensions 211 mm x 315 mm x 78 mm (8.3 in x 12.4 in x 3.1 in) (MS202xC models)
211 mm x 315 mm x 97 mm (8.3 in x 12.4 in x 3.8 in) (MS203xC models)
Weight 4.5 kg (9.9 lbs) (MS202xC models)
4.8 kg (10.5 lbs) (MS203xC models)

Spectrum Analyzer Performance Specifications

Parameters / Characteristics Specifications
Frequency Range MS2036C: 9 kHz to 9 GHz
MS2037C: 9 kHz to 15 GHz
MS2038C: 9 kHz to 20 GHz
Accuracy Aging: ± 1.0 x 10–6 per year for 10 years
Accuracy: ± 0.3 x 10–6 (25 °C ± 25 °C) plus aging
(see Option 31 for improved frequency reference aging and accuracy)
Resolution 1 Hz 
Sweep Time 7 µs to 3600 s in zero span
Sweep Time Accuracy ± 2 % in zero span
SSB Phase Noise (1 GHz) –106 dBc/Hz (10 kHz offset)
–110 dBc/Hz (100 kHz offset)
–116 dBc/Hz (1 MHz offset)
–129 dBc/Hz (10 MHz offset)
Resolution Bandwidth (RBW) 1 Hz to 10 MHz in 1–3 sequence ± 10 % (–3 dB bandwidth)
Amplitude Dynamic Range >106 dB minimum at 2.4 GHz, 2/3 (TOI-DANL) in 1 Hz RBW
Displayed Average Noise Level (DANL) –164 dBm in 1 Hz RBW, typical
Amplitude Accuracy ±0.5 dB (9 kHz to 18 GHz), typical
±1.0 dB (> 18 GHz to 20 GHz), typical
Spurious Responses Third-Order Intercept (TOI) –20 dBm tones 100 kHz apart, 0 dB Attenuation Preamp OFF, Reference Level –20 dBm
    TOI = +14 dBm minimum (2.4 GHz)
    TOI = +20 dBm typical (50 MHz to 20 GHz)

Options

Options Descriptions
Hardware Options
(MS2036C)
MS2036C-0002 Time Domain (includes Option 0501, DTF)
MS2036C-0007 Secure Data Operation
MS2036C-0010 Built-in Variable Voltage Bias Tee
MS2036C-0015 Vector Voltmeter
MS2036C-0019 High Accuracy Power Meter (Requires USB Sensors, sold separately)
MS2036C-0025 Interference Analysis - provides a spectrogram display, signal strength with audible tone and RSSI (received signal strength indication)
(requires external antenna)
MS2036C-0027 Channel Scanner (requires external antenna)
MS2036C-0031 GPS Receiver (requires GPS antenna, sold separately)
MS2036C-0077 Balanced/Differential S-Parameters, 1-port
MS2036C-0501 Distance-to-Fault
MS2036C-0509 AM/FM/PM Demodulation Analyzer
MS2036C-0098 Z-540 Calibration
MS2036C-0099 Premium Calibration
Hardware Options
(MS2037C)
MS2037C-0002 Time Domain (includes Option 0501, Distance Domain)
MS2037C-0007 Secure Data Operation
MS2037C-0010 Built-in Variable Voltage Bias Tee
MS2037C-0011 K(f) Test Port Connector
MS2037C-0015 Vector Voltmeter
MS2037C-0019 High Accuracy Power Meter (Requires USB Sensors, sold separately)
MS2037C-0025 Interference Analysis - provides a spectrogram display, signal strength with audible tone and RSSI (received signal strength indication)
(requires external antenna)
MS2037C-0027 Channel Scanner (requires external antenna)
MS2037C-0031 GPS Receiver (requires GPS antenna, sold separately)
MS2037C-0077 Balanced/Differential S-Parameters, 1-port
MS2037C-0501 Distance-to-Fault
MS2037C-0509 AM/FM/PM Demodulation Analyzer
MS2037C-0098 Z-540 Calibration
MS2037C-0099 Premium Calibration
Hardware Options
(MS2038C)
MS2038C-0002 Time Domain (includes Option 0501, Distance Domain)
MS2038C-0007 Secure Data Operation
MS2038C-0010 Built-in Variable Voltage Bias Tee
MS2038C-0011 K(f) Test Port Connector
MS2038C-0015 Vector Voltmeter
MS2038C-0019 High Accuracy Power Meter (Requires USB Sensors, sold separately)
MS2038C-0025 Interference Analysis - provides a spectrogram display, signal strength with audible tone and RSSI (received signal strength indication)
(requires external antenna)
MS2038C-0027 Channel Scanner (requires external antenna)
MS2038C-0031 GPS Receiver (requires GPS antenna, sold separately)
MS2038C-0077 Balanced/Differential S-Parameters, 1-port
MS2038C-0501 Distance-to-Fault
MS2038C-0509 AM/FM/PM Demodulation Analyzer
MS2038C-0098 Z-540 Calibration
MS2038C-0099 Premium Calibration


Checking with Anritsu...    




Checking with Anritsu...    




Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


MS2024B/ MS2025B


MS202xB MS202xB MS202xB
MS202xB
MS202xB
MS202xB

S-Parameter Analysis in the Field

The VNA Master™ MS202xB/3xB series is a compact handheld multifunction instrument that offers a portable yet powerful vector network analyzer, allowing you to do S-parameter analysis in the field - anytime, anywhere. The MS203xB models also offer a highperformance spectrum analyzer with industry-leading ultra-low noise floor. Based on Anritsu´s 9th generation handheld platform, the VNA Master™ offers unmatched measurement breadth, depth, and precision; reducing the number of different tools needed to analyze modern communication systems in the field, on a tower, on a flightline or in a vehicle.

Vector Analyzer Key Features

  • Broadband coverage of 500 kHz to 4/6 GHz 1-path, 2-port Vector Network Analyzer
  • Intuitive Graphical User Interface (GUI) with convenient Touch Screen
  • VNA-quality error correction for directivity and source match
  • 2-port Transmission Measurements: High/Low Power

2 Port Vector Network Analyzer

VNA Master™ features a 2-port Vector Network Analyzer to be able to test and verify the performance of feedline, filtering, and antenna components. This includes:

  • Connectors
  • Cables/Jumpers
  • Antenna Isolators
  • Multicouplers/Diplexers/Duplexers
  • Tower Mounted Amplifiers

2-port Transmission Measurements can help identify poor filter adjustment, antenna isolation, and degraded tower mounted amplifiers. The goal of these measurements is to maximize the system coverage and capacity with problem-free base stations.

Antenna System Failure Mechanisms

Maintenance is an on going requirement as antenna system performance can degrade at any point in time due to:

  • Loose connectors
  • Improperly weatherized connectors
  • Pinched cables
  • Poor grounding
  • Corroded connectors
  • Lightning strikes
  • Strong winds misaligning antennas
  • Water intrusion into cables
  • Bullet holes, nails, or rodent damage to the cable

Making Measurements Easier

The VNA Master™ provides features for making measurements easier to perform and for analyzing test results such as:

  • Fast sweep speed, measurement point selection, and flexible display formats make it easy to view and adjust base station RF system performance.
  • High RF Immunity mode for testing in harsh RF environments.
  • Trace Overlay compares reference traces to see changes over time.
  • Limit Lines and Alarming for providing reference standards.
  • High and Low Power output selection to test tower-top components without climbing the tower.
  • Internal Bias-Tee to power up TMAs for testing when off-line.
  • GPS tagging of data to verify location of tests.
  • User-selectable menu scheme offers choice of either full VNA capability or simplified cable and antenna user interface.

ms202xb_simultaneous_measurements ms202xb_simultaneous_viewing

VNA Performance Specifications

Parameters / Characteristics Specifications
Frequency Range MS2024/34B: 500 kHz to 4 GHz
MS2025/35B: 500 kHz to 6 GHz
Accuracy 2.5 ppm
Resolution 1 Hz
Dynamic Range  100 dB (2 MHz to ≤ 4 GHz)
 90 dB (4 GHz to ≤ 6 GHz)
Sweep Speed (Typical) 850 μs/point (500 kHz to 6 GHz)
Directivity > 42 dB at ≤ 6 GHz
Noise Floor (Typical) –100 dBm (500 kHz to 3 GHz)
–103 dBm (3 GHz to 4 GHz)
–93 dBm (4 GHz to 6 GHz)
General Dimensions 273 mm x 199 mm x 91 mm (10.7 in x 7.8 in x 3.6 in)
Weight 3.5 kg (7.6 lbs) including battery

Options

Options Descriptions
Hardware Options
(MS2024B)
MS2025B-0010 Built-in Variable Voltage Bias Tee
MS2024B-0015 Vector Voltmeter
MS2024B-0019 High Accuracy Power Meter (Requires USB Sensors, sold separately)
MS2024B-0031 GPS Receiver (requires GPS antenna, sold separately)
MS2024B-0098 Z-540 Calibration
MS2024B-0099 Premium Calibration
MS2024B-0411 Ethernet Connectivity
Hardware Options
(MS2025B)
MS2025B-0010 Built-in Variable Voltage Bias Tee
MS2025B-0015 Vector Voltmeter
MS2025B-0019 High Accuracy Power Meter (Requires USB Sensors, sold separately)
MS2025B-0031 GPS Receiver (requires GPS antenna, sold separately)
MS2025B-0098 Z-540 Calibration
MS2025B-0099 Premium Calibration
MS2025B-0411 Ethernet Connectivity


Checking with Anritsu...    




Checking with Anritsu...    




Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


MS2034B/MS2035B


MS203xB MS203xB MS203xB
MS203xB
MS203xB
MS203xB

S-Parameter Analysis in the Field

The VNA Master™ MS202xB/3xB series is a compact handheld multifunction instrument that offers a portable yet powerful vector network analyzer, allowing you to do S-parameter analysis in the field - anytime, anywhere. The MS203xB models also offer a highperformance spectrum analyzer with industry-leading ultra-low noise floor. Based on Anritsu´s 9th generation handheld platform, the VNA Master™ offers unmatched measurement breadth, depth, and precision; reducing the number of different tools needed to analyze modern communication systems in the field, on a tower, on a flightline or in a vehicle.

Key Features

Vector Analyzer Key Features

  • Broadband coverage of 500 kHz to 4/6 GHz 1-path, 2-port Vector Network Analyzer
  • Intuitive Graphical User Interface (GUI) with convenient Touch Screen
  • VNA-quality error correction for directivity and source match
  • 2-port Transmission Measurements: High/Low Power

+ Spectrum Analyzer Key Features

  • Measure: Occupied Bandwidth, Channel Power, ACPR, C/I
  • Interference Analyzer: Spectrogram, Signal Strength, RSSI, Signal ID
  • Frequency Accuracy: < ± 50 ppb with GPS On
  • Traces: Normal, Max Hold, Min Hold, Average, # of Averages
  • Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
  • Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas

Spectrum Analyzer

The VNA Master™ MS203xB models feature the most powerful handheld spectrum analyzer in their class with unmatched performance in:

  • Sensitivity
  • Dynamic Range
  • Phase Noise
  • Frequency Accuracy
  • Sweep Speed

The goal of Spectrum Analyzer measurements is to accurately monitor, measure, and analyze RF signals and their environments. It finds rouge signals, measures carriers and distortion, and verifies base stations´ signal performance. It validates carrier frequency and identifies desired and undesired signals.


ms203xb_sweep_speed ms203xb_auto_measurements

Simple but Powerful

The VNA Master™ features dedicated routines for one-button measurements. For more in-depth analysis, the technician has control over settings and features that are not found even on lab-grade benchtop spectrum analyzers. For example, the VNA Master™ MS203xB models offers:

  • Multiple sweep detection methods - Peak, Negative, True RMS, Quasi-Peak, Sample.
  • Advanced marker functions - noise marker, tracking marker, peak search, sequential peak search, delta markers.
  • Advanced limit line functions - automatic envelope creation, relative limits, limit mirror, point/ segment/ line adjustment.
  • Save-on-Event - automatically saves a sweep when crossing a limit line.

The VNA Master™ offers full control over bandwidth and sweep settings, or can be set to automatically optimize for best possible trade-off between accuracy and speed.

ms203xc_sweep_speed ms203xc_auto_measurements

GPS-Assisted Frequency Accuracy

With GPS Option 31 the frequency accuracy is reduced to < 50 ppb (parts per billion). Also all measurements can be GPS tagged for exporting to maps.

Rx Noise Floor Testing

The VNA Master™ can measure the receive noise floor on a base station´s uplink channel using the channel power measurement. An elevated noise floor indicates interference that can lead to call blocking, denial of service, call drops, low data rates, and lowered system capacity.


VNA Performance Specifications

Parameters / Characteristics Specifications
Frequency Range MS2024/34B: 500 kHz to 4 GHz
MS2025/35B: 500 kHz to 6 GHz
Accuracy 2.5 ppm
Resolution 1 Hz
Dynamic Range  100 dB (2 MHz to ≤ 4 GHz)
 90 dB (4 GHz to ≤ 6 GHz)
Sweep Speed (Typical) 850 μs/point (500 kHz to 6 GHz)
Directivity > 42 dB at ≤ 6 GHz
Noise Floor (Typical) –100 dBm (500 kHz to 3 GHz)
–103 dBm (3 GHz to 4 GHz)
–93 dBm (4 GHz to 6 GHz)
General Dimensions 273 mm x 199 mm x 91 mm (10.7 in x 7.8 in x 3.6 in)
Weight 3.5 kg (7.6 lbs) including battery

Spectrum Analyzer Performance Specifications

Parameters / Characteristics Specifications
Frequency Range MS2034B: 9 kHz to 4 GHz
MS2035B: 9 kHz to 6 GHz
Accuracy Aging: ± 1.0 ppm/year Accuracy: ± 1.5 ppm (25 °C ± 25 °C) + aging, ≤ ± 50 ppb with GPS On
(see Option 31 for improved frequency reference aging and accuracy)
Resolution 1 Hz 
Sweep Time Minimum 100 ms, 10 µs to 600 s in zero span
Sweep Time Accuracy ± 2 % in zero span
SSB Phase Noise (1 GHz) –110 dBc/Hz (10 kHz offset)
–105 dBc/Hz (100 kHz offset)
–115 dBc/Hz (1 MHz offset)
Resolution Bandwidth (RBW) 10 Hz to 3 MHz in 1-3 sequence ± 10% (1 MHz max in zero-span) (-3 dB bandwidth)
Amplitude Dynamic Range > 95 dB (2.4 GHz), 2/3 (TOI-DANL) in 10 Hz RBW
Displayed Average Noise Level (DANL) –162 dBm in 1 Hz RBW, typical
Amplitude Accuracy ±2.0 dB (9 kHz to 100 kHz), typical, Preamp off
±1.25 dB, ±0.5 dB (100 kHz to 4.0 GHz), typical
±1.50 dB, ±0.5 dB (> 4.0 GHz to 6.0 GHz), typical
Spurious Responses Third-Order Intercept (TOI) Preamp Off (-20 dBm tones 100 kHz apart, 10 dB attenuation)
    TOI = +16 dBm (800 MHz)
    TOI = +20 dBm (2400 MHz)
    TOI = +25 dBm (200 - 2200 MHz)typical
    TOI = +28 dBm typical (> 2.2 GHz to 5.0 GHz)
    TOI = +33 dBm typical (> 5.0 GHz to 6.0 GHz)

Options

Options Descriptions
Hardware Options
(MS2034B)
MS2034B-0010 Built-in Variable Voltage Bias Tee
MS2034B-0015 Vector Voltmeter
MS2034B-0019 High Accuracy Power Meter (Requires USB Sensors, sold separately)
MS2034B-0025 Interference Analyzer
MS2034B-0027 Channel Scanner
MS2034B-0031 GPS Receiver (requires GPS antenna, sold separately)
MS2034B-0098 Z-540 Calibration
MS2034B-0099 Premium Calibration
MS2034B-0411 Ethernet Connectivity
MS2034B-0431 Coverage Mapping
(requires option 31 GPS)
MS2034B-0509 AM/FM/PM Demodulation Analyzer
Hardware Options
(MS2035B)
MS2035B-0010 Built-in Variable Voltage Bias Tee
MS2035B-0015 Vector Voltmeter
MS2035B-0019 High Accuracy Power Meter (Requires USB Sensors, sold separately)
MS2035B-0025 Interference Analyzer
MS2035B-0027 Channel Scanner
MS2035B-0031 GPS Receiver (requires GPS antenna, sold separately)
MS2035B-0098 Z-540 Calibration
MS2035B-0099 Premium Calibration
MS2035B-0411 Ethernet Connectivity
MS2035B-0431 Coverage Mapping
(requires option 31 GPS)
MS2035B-0509 AM/FM/PM Demodulation Analyzer


Checking with Anritsu...    




Checking with Anritsu...    




Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.