The Perfect Test & Measurement Partner

Anritsu - Handset One-box Testers

MT8870A

Suitable for Non-signalling Testing of Smartphone and Chipset Module

The MT8870A Universal Wireless Test Set has been specifically designed for the high volume manufacturing test of all common cellular and short range wireless technologies. An MT8870A instrument mainframe can contain up to four MU887000A/01A TRx test modules, each capable of independent control by an external PC. Each module has an integrated Vector Signal Generator (VSA) and Vector Signal Analyzer (VSA) to perform both Transmitter and Receiver RF tests, including both Analog and Digital Audio Analyzer.


All-in-one Platform Accommodating 4 Test Modules

mt8870a_modular.jpg

Up to four measurement modules can be installed in one main frame and each module can be controlled independently. The four installed modules share the same power supply, chassis, and internal bus interface, helping cut infrastructure costs.


Lower Cost of Test, Smaller Footprint and Cuts Line Downtime

With four TRx modules installed in one MT8870A main frame, the shared power supply, chassis, internal communications bus, remote controller, reference frequency oscillator, software license, etc., cut capital costs.

Whereas easy module swap-out cuts line downtime without having to send the whole unit for repair and an immediate changeovers takes only minutes.


Four Test Ports per Module (2 Full-duplex and 2 Half-duplex OR 4 Full-duplex)

mt8870a_ports.jpg

Each MU887000A/01A TRX Test Module has two full-duplex and two half-duplex RF connectors.

The full-duplex ports incorporate dividers at the front end to support simultaneous tests in both TX and RX directions when testing typical wireless standards.

The half-duplex ports incorporate switches at the front end to switch between each test port when used either for TX or RX tests. These half-duplex ports have higher sensitivity than the full-duplex ports and are ideal for low-level wireless signals.


Shared Software License and Easy Software Expansion

mt8870a_license.jpg

The TX measurement software packages and waveforms can each be licensed separately. One license can be used for up to four TRX test modules, cutting test equipment costs. A TX measurement software package is required for TX tests for each communication standard and a waveform is required for RX tests.

Since hardware specifications are shared by all MU887000A/01A TRx modules, new standards are easily supported by adding software licenses.


Fast Measurements Independent of External PC

mt8870a_mu887000a.jpg

The Dual Core CPU, DDR3 memory and fast PCIe bus in each MU887000A/01A TRx Test module assure fast measurements independent of the external PC.

Rx test waveforms can be preloaded into 4-GB ARB memory, cutting reload times when switching wireless standards.


Wide Frequency Range from 10 MHz to 6 GHz (Option MU887000A/01A-001)

To provide future-proof frequency-band extendibility, the frequency band covers a wide range from 10 MHz at the lower end to 6 GHz (option) at the upper end.

The wideband (10 MHz to 6 GHz) signal generator and signal analyzer support easy and smooth extendibility for new wireless standards, unlike dedicated test set supporting only specific frequencies.

Note: Standard TRx module operates from 10 MHz to 3.8 GHz


160 MHz Measurement Bandwidth comes as Standard

The MU887000A/01A TRx Test Module is able to perform RF transmitter / receiver testing of the latest WLAN standard 802.11ac wireless modules

Usually, upgrading bandwidth requires extra costs for changing instruments, adding options, etc., but since the MU887000A/01A has a 160MHz wide bandwidth as standard, these extra costs are unnecessary.


Support All Assorted Cellular and Wireless Standards Test

The MU887000A/01A TRx Test module is able to support the RF (PHY) testing of both cellular (LTE, W-CDMA, GSM etc.) and Short Range Wireless (WLAN and Bluetooth®) receivers and transmitters.

Supported Standards:

mt8870a_standards.jpg
  • LTE-FDD
  • LTE-TDD
  • W-CDMA / HSPA
  • TD-SCDMA
  • GSM/EDGE
  • CDMA2000®
  • 1xEVDO
  • WLAN 802.11a/b/g/n and 802.11ac
  • Bluetooth®
  • GPS, GLONASS and BeiDou
  • FM and DVB-H
  • ISDB-T and ISDB-Tmm

Simultaneous Measurement of 4 Devices and Parallel Measurement of Multiple Wireless Technologies

mt8870a_parallel.jpg

With four modules installed in the MT8870A, four test devices can be connected and measured in parallel simultaneously. Different technologies can be measured in parallel, helping reduce both measurement times and line test equipment footprint.

For example: Two TRx Test Modules can be used to measure multiple wireless technologies in one smartphone. The multiple antennas for the various wireless technologies in the smartphone are connected all at one time to execute measurements in parallel, greatly reducing the problems of moving smartphones between test stations and re-booting time for smartphone.


Comprehensive MIMO Measurement Solutions

mt8870a_mimo.jpg

The MT8870A is ideal for performing streaming measurements from each antenna under conditions closely mimicking a real usage environment at the R&D and design stages. There is no need for troublesome external cable connections, because the timing of each MU887000A/01A unit and the 10-MHz reference frequency are synchronized by the internal connections, offering easy True MIMO measurement.


mt8870a_mimo_chart.jpg

Audio Analyzer and Audio Generator in Each TRx Module (Option MU887000A/01A-002)

By using FM TRx measurement capability, the built-in audio analyzer / generator is available to perform audio signal measurements. Support mono audio and stereo audio with analog interface or digital interface helping reduce the equipment footprint for wireless module manufacturing.



Download MT8870A Brochures for more features


Basic Performance

Parameters / Characteristics Specifications
General Number of Slots 4
Remote Programming Interface Ethernet (1000Base-T), GPIB for each module (with option MT8870A-001)
Dimensions and Mass 426 (W) x 221.5 (H) x 498 (D) mm (Exclude surface projection)
≤11.5 kg (Excluding all options and modules)
≤30.0 kg (Including options and modules)

MU887000A TRx Slot-in Test Module

Parameters / Characteristics Specifications
RF Test Ports Ports 4 (2 Full-duplex, 2 Half-duplex)
Max. Input Level +35 dBm (Test port 1 and 2)
+25 dBm (Test port 3 and 4)
AF Test Ports Ports Analog Port (L/R BNC-female), Digital Port (RJ-45)

MU887001A TRX Slot-in Test Module

Parameters / Characteristics Specifications
RF Test Ports Ports 4 Full-duplex
Max. Input Level +35 dBm
AF Test Ports Ports Analog Port (L/R BNC-female), Digital Port (RJ-45)

Signal Generator Function

Frequency Setting Range 10 MHz to 3.8 GHz
10 MHz to 6.0 GHz (with MU887000A/01A-001)
Resolution 1 Hz
Accuracy Depends on MT8870A reference oscillator accuracy
Amplitude Setting Range Full-duplex Test Port
  -130 to -10 dBm (≤ 3.8 GHz)
  -130 to -18 dBm (> 3.8 GHz)
Half-duplex Test Port (with MU
  -120 to 0 dBm (≤ 3.8 GHz)
  -120 to -8 dBm (> 3.8 GHz)
Setting Resolution 0.1 dB
Accuracy CW, After CAL, 10° to 40°C
Full-duplex Test Port
  Output level: ≥ -120 dBm (≤ 3.8 GHz), ≥ -100 dBm (>3.8 GHz)
  ±1.3 dB (10 MHz ≤ f < 400 MHz) (Signal Analyzer input level: +15 dBm)
  ±0.7 dB (typ.), ±1.0 dB (400 MHz ≤ f ≤ 3.8 GHz)
  ±1.0 dB (typ.), ±1.3 dB (3.8 GHz < f ≤ 6.0 GHz)
Half-duplex Test Port
  Output level: ≥ -110 dBm
  ±1.3 dB (10 MHz ≤ f < 400 MHz)
  ±0.7 dB (typ.), ±1.0 dB (400 MHz ≤ f ≤ 3.8 GHz)
  ±0.7 dB (typ.), ±1.3 dB (3.8 GHz < f ≤ 6.0 GHz)
Spurious Response Harmonic Distortion < -25 dBc
Vector Modulation Bandwidth Maximum 160 MHz

Signal Analyzer Function

Frequency Setting Range 10 MHz to 3.8 GHz
10 MHz to 6.0 GHz (with MU887000A/01A-001)
Resolution 1 Hz
Amplitude Resolution 0.1 dB
Accuracy CW, Measurement bandwidth: 300 kHz, RBW: 100 kHz, After CAL
Full-duplex Test Port
 10 MHz ≤ f < 400 MHz, Signal Generator: Off, +10° to +40°C
   ±0.7 dB (-30 dBm ≤ p ≤ +15 dBm)
   ±0.9 dB (-55 dBm ≤ p < -30 dBm)
   ±1.1 dB (-65 dBm ≤ p < -55 dBm)
 400 MHz ≤ f ≤ 3.8 GHz, +10° to +40°C
   ±0.3 dB (typ.), ±0.5 dB (-30 dBm ≤ p ≤ +35 dBm)
   ±0.7 dB (-55 dBm ≤ p < -30 dBm)
   ±0.9 dB (-65 dBm ≤ p < -55 dBm)
 3.8 GHz < f < 6.0 GHz, +20° to +30°C
   ±0.7 dB (-30 dBm ≤ p ≤ +35 dBm)
   ±0.9 dB (-55 dBm ≤ p < -30 dBm)
   ±1.1 dB (-65 dBm ≤ p < -55 dBm)
Half-duplex Test Port
 10 MHz ≤ f < 400 MHz, Signal Generator: Off, +10° to +40°C
   ±0.7 dB (-30 dBm ≤ p ≤ +15 dBm)
   ±0.9 dB (-55 dBm ≤ p < -30 dBm)
   ±1.1 dB (-65 dBm ≤ p < -55 dBm)
 400 MHz ≤ f ≤ 3.8 GHz, +10° to +40°C
   ±0.7 dB (-30 dBm ≤ p ≤ +25 dBm)
   ±0.9 dB (-55 dBm ≤ p < -30 dBm)
   ±1.1 dB (-65 dBm ≤ p < -55 dBm)
 3.8 GHz < f < 6.0 GHz, +20° to +30°C
   ±0.7 dB (-30 dBm ≤ p ≤ +25 dBm)
   ±0.9 dB (-55 dBm ≤ p < -30 dBm)
   ±1.1 dB (-65 dBm ≤ p < -55 dBm)
Linearity CW, Measurement bandwidth: 300 kHz, RBW: 100 kHz
±0.2 dB (0 to -40 dBm, ≥ -55 dBm)
±0.4 dB (0 to -40 dBm, ≥ -65 dBm)
Modulation Analysis Maximum Bandwidth 25 MHz (10 MHz ≤ f < 500 MHz)
80 MHz (500 MHz ≤ f < 1.9 GHz)
160 MHz (1.9 GHz ≤ f ≤ 6.0 GHz)

Audio Measurement Hardware (MU887000A/01A-002)

Parameters / Characteristics Specifications
Analog Audio Audio Generator Frequency Range 20 Hz to 20 kHz
Output Level Range 0 (off), 1 mV to 5 Vpeak (100 kΩ termination)
Impedance 1Ω (nominal), (AC Coupling)
Audio Analyzer Frequency Range 20 Hz to 20 kHz
Input Level Range 1 mV peak to 5 V peak (30 Vrms Max.)
Impedance 100 kΩ (nominal), (AC Coupling)
Digital Audio Audio Generator Frequency Range 20 Hz to 20 kHz (44.1 kHz, 48 kHz Sampling)
20 Hz to 14 kHz (32 kHz Sampling)
20 Hz to 7 kHz (16 kHz Sampling)
Bit Resolution 16 bits / 24 bits
Audio Generator Sampling Rate 16 kHz, 32 kHz, 44.1 kHz, 48 kHz
Bit Resolution 16 bits / 24 bits
Download MT8870A Brochures for complete specifications




Options Descriptions / Documentations
Hardware
Main Frame
MT8870A Universal Wireless Test Set (Main Frame)
MT8870A-001 Add GPIB Control (for all modules)

Ethernet (1000Base-T is standard)

Slot-in Test Module MU887000A 2 Full-duplex and 2 Half-duplex TRx Test Module (10 MHz to 3.8 GHz)
MU887001A-001 4 Full-duplex TRx Test Module (10 MHz to 3.8 GHz)
MU887000A/01A-001 6 GHz Frequency Extension (per module)
MU887000A/01A-002 Audio Measurement Hardware (per module)
Software
(Per Main Frame)
MX887010A Cellular Standards Sequence Measurement
MX887011A W-CDMA/HSPA Uplink TX Measurement
MX887012A GSM/EDGE Uplink TX Measurement
MX887013A LTE FDD Uplink TX Measurement
MX887014A LTE TDD Uplink TX Measurement
MX887015A CDMA2000® Reverse Link TX Measurement
MX887016A 1xEV-DO Reverse Link TX Measurement
MX887017A TD-SCDMA Uplink TX Measurement
MX887030A WLAN 802.11b/g/a/n TX Measurement (requires MU887000A/01A-001)
MX887031A WLAN 802.11ac TX Measurement (requires MU887000A/01A-001)
MX887040A Bluetooth® TX Measurement
MX887050A Short Range Wireless Average Power and Frequency Measurement
MX887070A FM/Audio TRx Measurement (requires MU887000A/01A-002)
Waveform File
(Per Main Frame)
MV887011A W-CDMA/HSPA Downlink Waveforms
MV887012A GSM/EDGE Downlink Waveforms
MV887013A LTE FDD Downlink Waveforms
MV887014A LTE TDD Downlink Waveforms
MV887015A CDMA2000® Forward Link Waveforms
MV887016A 1xEV-DO Forward Link Waveforms
MV887017A TD-SCDMA Downlink Waveforms
MV887030A WLAN 802.11b/g/a/n Waveforms (requires MU887000A/01A-001)
MV887031A WLAN 802.11ac Waveforms (requires MU887000A/01A-001)
MV887040A Bluetooth® Waveforms
MV887070A FM RDS Waveforms
MV887100A GPS Waveforms
MV887102A GLONASS Waveforms
MV887110A DVB-H Waveforms
MV887111A ISDB-T Waveforms
MV887112A ISDB-Tmm Waveforms
Warranty Service
(Main Frame)
MT8870A-ES2102 years Extended Warranty Service
MT8870A-ES3103 years Extended Warranty Service
MT8870A-ES5105 years Extended Warranty Service
Warranty Service
(Per Module)
MU887000A/01A-ES2102 years Extended Warranty Service
MU887000A/01A-ES3103 years Extended Warranty Service
MU887000A/01A-ES5105 years Extended Warranty Service



Loading... in progress



Loading... in progress


Note: All trademarks that appear on this website are the property of their respective owners.


MT8820C

New All-in-One Test Platform Supporting LTE and Compatible with Existing 3G/2G

The MT8820C supports manufacturing of LTE mobiles, including RF calibration, RF parametric testing, and functional tests. It is also supporting LTE/3G/2G UE RF development as well as manufacturing of multi-systems.


Supports Multi-communication Systems and Upgradeable from MT8820B/15B

mt8820c_2g3glte.jpg

The MT8820C Radio Communication Analyzer platform covers a frequency range of 30 MHz to 2.7 GHz (3.4 GHz to 3.8 GHz with option MT8820C-018)

When the dedicated optional measurement softwares and hardwares are installed, the major Tx and Rx characteristics of LTE (FDD/TDD), LTE-Advanced (FDD), W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/GPRS/EGPRS, CDMA2000® 1X, CDMA2000® 1xEV-DO Rev. A, PHS/Advanced PHS, and TD-SCDMA/HSPA terminals can be measured using a single MT8820C unit.

The MT8820B/15B hardware and software can be upgraded to the MT8820C, helping maximize investment efficiency.


Summary of Supported Communication Systems

Communication System Software Option No.
LTE LTE FDD Measurement Software MX882012C
LTE-Advanced FDD DL CA Measurement Software MX882012C-021    *1
LTE TDD Measurement Software MX882013C
LTE FDD Measurement Software Lite MX882042C    *2
LTE TDD Measurement Software Lite MX882043C    *2
W-CDMA W-CDMA Measurement Software MX882000C
W-CDMA Call Processing Software MX882050C    *3
MX882051C    *3
W-CDMA Ciphering Software MX882070C    *3
MX882071C    *3
HSDPA Measurement Software MX882000C-011    *3
HSUPA Measurement Software MX882000C-021    *3
HSPA Evolution Measurement Software MX882000C-031    *3
DC-HSDPA Measurement Software MX882000C-032    *3,    *4
TD-SCDMA TD-SCDMA Measurement Software MX882007C
TD-SCDMA HSDPA Measurement Software MX882007C-011    *5
TD-SCDMA HSUPA Measurement Software MX882007C-021    *5
GSM/GPRS GSM Measurement Software MX882001C
EGPRS EGPRS Measurement Software MX882001C-011
CDMA2000® 1X CDMA2000® 1X Measurement Software MX882002C
CDMA2000® 1xEV-DO (Rev.0) CDMA2000 1xEV-DO Measurement Software MX882006C    *6
CDMA2000® 1xEV-DO (Rev.A) CDMA2000® 1xEV-DO Rev.A Measurement Software MX882006C-011    *6
LTE Parallelphone Measurement Software MX882010C
W-CDMA
TD-SCDMA
GSM/GPRS/EGPRS
CDMA2000® 1X/1xEV-DO
PHS PHS Measurement Software MX882005C
ADVANCED PHS ADVANCED PHS Measurement Software MX882005C-011

*1 : For LTE-Advanced FDD CA terminal connection, contact your Anritsu sales representative.
*2 : The MX882042C and MX882043C are non-Call Processing products.
*3 : For supported W-CDMA terminal connections, contact your sales representative.
*4 : DC-HSPA measurements require the MT8820C-012, MT8820C-001 (2 sets), MX882000C, MX882000C-011, MX882000C-021, MX882000C-031, MX882000C-032, MX882010C and MX882050C (as well as one MT8820C). DC-HSDPA is only supported by the MT8820C.
*5 : For supported TD-SCDMA HSDPA/HSUPA terminal connections, contact your sales representative.
*6 : The MX882006C supports RF measurements for CDMA2000® 1xEV-DO (Rev.0) mobile terminals. The MX882006C-011 supports RF measurements for CDMA2000® 1xEV-DO Rev. A mobile terminals.


Supports All Manufacturing Processes

The MT8820C solution supports all tests ranging from RF parametric to UE function and performance tests.

Supported RF Parametric Tests:


  • UE Transmitter Test
  • UE Receiver Test
  • Signalling / Non-Signalling Mode
  • UE Calibration

Supported Function and Performance Tests:


  • Voice Call, Video Call
  • External Packet Data
  • Current Consumption

Advanced Digital Signal Processing and Batch Measurement

Manufacturing and inspection test times have been dramatically cut by incorporating advanced DSP and parallel measurement technologies. Furthermore, several measurement items can be selected freely for batch measurement, and the number of measurements for each measurement item can be configured separately. The one-touch operation supports easy and quick measurement of Tx and Rx characteristics, including transmit frequency, modulation accuracy, transmit power, spectrum emission mask, adjacent channel leakage power ratio, occupied bandwidth, and BER.


Parallelphone™ Measurement

mt8820c_parallelphone.jpg

When the Parallelphone™ Measurement option is installed in the MT8820C main frame, two different mobile terminals can be connected and tested simultaneously with a single MT8820C using its second RF, AF, GPIB, and Ethernet port.

This functionality significantly improves manufacturing efficiency by reducing production costs (return on investment and energy saving) and space.


MT8820A/B Compatibility

All functions, performance, remote commands are backwards compatible with the MT8820A/B, so customers can easily retask control software and knowledge from the MT8820A/B.


Download MT8820C Brochures for more features


Basic Performance

Parameters / Characteristics Specifications
Frequency Frequency Range 30 MHz to 2700 MHz (3400 MHz to 3800 MHz extension with option MT8820C-018)
RF Input Max. Input Level +35 dBm (Main 1)
RF Signal Generator Frequency Frequency Range 30 MHz to 2700 MHz (setting range: 400 kHz to 2700 MHz)
3400 MHz to 3800 MHz (valid only if MT8820C-018 is installed)
Resolution 1 Hz
Output Level Level Range -140 to -10 dBm (Main 1), -130 to 0 dBm (AUX 1)
Resolution 0.1 dB
Accuracy Main:
  ±0.7 dB (typ.), ±1.0 dB (Output frequency ≥50 MHz)
  ±1.5 dB (Output frequency <50 MHz)
  * -120 to -10 dBm, after calibration, 10° to 40°C
Aux:
  ±0.7 dB (typ.), ±1.0 dB (Output frequency ≥50 MHz),
  ±1.5 dB (Output frequency <50 MHz)
  * -120 to 0 dBm, after calibration, 10° to 40°C
LTE FDD Measurement
 (Hardware: Option 008 &   Software: MX882012C) or
LTE TDD Measurement
 (Hardware: Option 008 &   Software: MX882013C)
Frequency Frequency Range 400 MHz to 2700 MHz
3400 MHz to 3800 MHz (valid only if MT8820C-018 is installed)
Amplitude Measurements Input Level -60 to +35 dBm (Main)
Accuracy ±0.3 dB (typ.), ±0.5 dB (-20 to +35 dBm)
±0.7 dB (-50 to -20 dBm)
±0.9 dB (-60 to -50 dBm)
* 400 MHz to 2700 MHz, after calibration, 10° to 40°C
±0.3 dB (typ.), ±0.5 dB (-20 to +35 dBm) (18° to 28°C)
±0.7 dB (-50 to +35 dBm)
±0.9 dB (-60 to -50 dBm)
* 3400 MHz to 3800 MHz, after calibration, 10° to 40°C
Linearity ±0.2 dB (-40 to 0 dB, ≥-50 dBm)
±0.4 dB (-40 to 0 dBm, ≥-60 dBm)
* 400 MHz to 2700 MHz, after calibration, 10° to 40°C
±0.2 dB (-40 to 0 dB, ≥-50 dBm, 18° to 28°C)
±0.3 dB (-40 to 0 dB, ≥-50 dBm)
±0.4 dB (-40 to 0 dBm, ≥-60 dBm)
* 3400 MHz to 3800 MHz, after calibration, 10° to 40°C
Frequency / Modulation Measurements Input Level -40 to +35 dBm (Main)
Carrier Frequency Accuracy ±(Setting frequency x Reference oscillator accuracy +15 Hz)
Measurement Object PUSCH, PRACH, PUCCH
Call Processing Call Controlling Registration, Call processing for Reference Measurement Channel
  (executes each processing conforming to 3GPP standards and performs pass/fail evaluation)
Mobile Terminal Controlling Output Level
  (executes each mobile terminal control conforming to 3GPP standards)
LTE FDD Measurement
 (Hardware: Option 008 &   Software: MX882042C) or
LTE TDD Measurement
 (Hardware: Option 008 &   Software: MX882043C)
Frequency Frequency Range 400 MHz to 2700 MHz
3400 MHz to 3800 MHz (valid only if MT8820C-018 is installed)
Amplitude Measurements Input Level -60 to +35 dBm (Main)
Accuracy ±0.3 dB (typ.), ±0.5 dB (-20 to +35 dBm)
±0.7 dB (-50 to -20 dBm)
±0.9 dB (-60 to -50 dBm)
* 400 MHz to 2700 MHz, after calibration, 10° to 40°C
±0.3 dB (typ.), ±0.5 dB (-20 to +35 dBm) (18° to 28°C)
±0.7 dB (-50 to +35 dBm)
±0.9 dB (-60 to -50 dBm)
* 3400 MHz to 3800 MHz, after calibration, 10° to 40°C
Linearity ±0.2 dB (-40 to 0 dB, ≥-55 dBm)
±0.4 dB (-40 to 0 dBm, ≥-60 dBm)
* 400 MHz to 2700 MHz, after calibration, 10° to 40°C
±0.2 dB (-40 to 0 dB, ≥-50 dBm, 18° to 28°C)
±0.3 dB (-40 to 0 dB, ≥-50 dBm)
±0.4 dB (-40 to 0 dBm, ≥-60 dBm)
* 3400 MHz to 3800 MHz, after calibration, 10° to 40°C
Frequency / Modulation Measurements Input Level -40 to +35 dBm (Main)
Carrier Frequency Accuracy ±(Setting frequency x Reference oscillator accuracy +15 Hz)
Measurement Object PUSCH
W-CDMA Measurement
 (Hardware: Option 001 &   Software: MX882000C, MX88205xC)
Frequency Frequency Range 300 MHz to 2700 MHz
Modulation Analysis Input Level -30 to +35 dBm (Main)
Modulation Accuracy ≤2.5% (at input of single DPCCH and single DPDCH)
RF Power Input Level -65 to +35 dBm (Main)
Measurement Accuracy ±0.3 dB (typ.), ±0.5 dB (-25 to +35 dBm)
±0.7 dB (-55 to -25 dBm)
±0.9 dB (-65 to -55 dBm)
* after calibration, 10° to 40°C
Measurement Object DPCH, PRACH
Occupied Bandwidth Input Level -10 to +35 dBm (Main)
Adjustment Channel Leakage Power Ratio (ACLR) Input Level -10 to +35 dBm (Main)
Modulation Point ±5 MHz, ±10 MHz
Error Rate Measurement Functions Insert PN9 or PN15 pattern in DTCH
Measurement Items BER, BLER
Call Processing Call Controlling Registration, Origination, Termination, Handover, Network disconnect, Terminal disconnect
  (executes each processing conforming to 3GPP standards and performs Pass/Fail evaluation)
Mobile Terminal Controlling Output Level, Loopback
  (executes each mobile terminal control conforming to 3GPP standards)
GSM / GPRS Measurement
 (Hardware: Option 002 &   Software: MX882001C)
Frequency Frequency Range 300 MHz to 2700 MHz
Frequency / Modulation Measurements Input Level -30 to +40 dBm (Average power of burst signal, Main)
Measurement Items Normal burst, RACH
Amplitude Measurements Input Level -30 to +40 dBm (Average power of burst signal, Main)
Measurement Items Normal burst, RACH
Accuracy ±0.3 dB (typ.), ±0.5 dB (-20 to +40 dBm)
±0.7 dB (-30 to -20 dBm)
* after calibration, 10° to 40°C
Linearity ±0.2 dB (-40 to 0 dB, ≥-30 dBm)
Error Rate Measurements Functions Frame, Bit and CRC error measurement
Measurement Object GSM
  Loopback data imposed on uplink TCH
  Serial data input from rear panel call processing I/O port
GPRS
  Number of blocks received from terminal imposed on uplink TCH for GPRS
Call Processing Call Controlling GSM
  (Location registration, Origination, Termination, Network disconnect, Terminal disconnect)
GPRS
  (Connection, Disconnection, Data transfer)
Mobile Terminal Controlling GSM
  (Output Level, Time slot, Timing Advance, Loopback On/Off)
GPRS
   (Test Mode A, Test Mode B, BLER)
CDMA2000® 1X Measurement
 (Hardware: Option 003 &   Software: MX882002C)
Frequency Frequency Range 300 MHz to 2700 MHz
Amplitude Measurements Input Level -65 to +35 dBm (Main)
Accuracy ±0.3 dB (typ.), ±0.5 dB (-25 to +35 dBm)
±0.7 dB (-55 to -25 dBm)
±0.9 dB (-65 to -55 dBm)
* after calibration, 10° to 40°C
Linearity ±0.2 dB (-40 to 0 dB, ≥-55 dBm)
±0.4 dB (-40 to 0 dBm, ≥-65 dBm)
Frequency / Modulation Measurements Input Level -30 to +35 dBm (Main)
Carrier Frequency Accuracy ±(Setting frequency x Reference oscillator accuracy +10 Hz)
Residual Waveform Quality > 0.999
Error Rate Measurements Functions Frame Error Rate (FER) measurement with service option 2, 9, 55 and 32 (TDSO)
Display Items Confidence Level, FER, Error Frame Count, Sample Frame Count
Call Processing Band Class BC 0 to 12, 14, 15, 18, 19
Call Controlling Location Registration, Origination, Termination, Network Disconnect, Terminal Disconnect
Paging Channel Data Rate Full
Radio Configuration F-RC1 + R-RC1, F-RC2 + R-RC2, F-RC3 + R-RC3, F-RC4 + R-RC3, F-RC5 + R-RC4
Supported Protocols IS-95B, J-STD-008C, ARIB T-53, Korean PCS, IS-2000 (SR1)
CDMA2000® 1xEV-DO Measurement
 (Hardware: Option 005 &   Software: MX882006C)
Frequency Frequency Range 300 MHz to 2700 MHz
Frequency / Modulation Measurements Input Level -30 to +35 dBm (Main)
Carrier Frequency Accuracy ±(Setting frequency x Reference oscillator accuracy +10 Hz)
Residual Waveform Quality > 0.999
Residual EVM < 2% rms
Code Domain Power Input Level -30 to +35 dBm (Main)
Measurement Accuracy ±0.2 dB (code power ≥-15 dBc)
±0.4 dB (code power ≥-23 dBc)
RF Signal Generator Channel Level Pilot channel, MAC channel, Control channel, Traffic channel, All 0 dB (reference Ior)
PN Offset 0 to 511
Waveform Quality > 0.99 (pilot only, AWGN Off)
AWGN Level -20 to +12 dB (relative level to CDMA signal) or Off
Max. CDMA Signal Output Level AWGN On -28 dBm (Main output), -18 dBm (AUX output)
Call Processing Band Class BC 0 to 12, 14, 15, 18, 19
Call Control Open Session, Close Session, AT Origination, NW Origination, AT Release, NW Release, Hard Handoff, Softer Handoff
Rev.Closed Loop Power Control Mode Closed Loop, Alternate, All 0 (All Up), All 1 (All Down)
Test Application Protocol RTAP, FTAP, FTAP + RTAP
TD-SCDMA Measurement
 (Hardware: Option 001, 007 &   Software: MX882007C)
Frequency Frequency Range 300 MHz to 2700 MHz
Amplitude Measurements Input Level -70 to +35 dBm (Main)
Measurement Accuracy ±0.3 dB (typ.), ±0.5 dB (-25 to +35 dBm)
±0.7 dB (-55 to -25 dBm)
±0.9 dB (-70 to -55 dBm)
*after calibration, 10° to 40°C
Linearity ±0.2 dB (-40 to 0 dB, ≥-55 dBm)
±0.4 dB (-40 to 0 dBm, ≥-65 dBm)
Frequency / Modulation Measurements Input Level -30 to +35 dBm (Main)
Carrier Frequency Accuracy ±(Setting frequency x Reference oscillator accuracy +10 Hz)
Measurement Object DPCH, UPPCH
Error Rate Measurements Functions Insert PN9 or PN15 Pattern in DTCH
Measurement Items BER, BLER
Call Processing Call Controlling Registration, Origination, Termination, Network Disconnect, Terminal Disconnect
  (executes each processing conforming to 3GPP standards and performs pass/fail evaluation)
Output Level, Loopback Output Level
  (executes each mobile terminal control conforming to 3GPP standards)
General Dimensions and Mass 426 (W) x 221.5 (H) x 498 (D) mm (Exclude surface projection)
≤30 kg (with all options)

* Typical values are only for reference and are not guaranteed specifications


Download MT8820C Brochures for complete specifications




Options Descriptions / Documentations
Hardware MT8820C Radio Communication Analyzer (Main Frame)
MT8820C-001 W-CDMA Measurement Hardware
MT8820C-002 TDMA Measurement Hardware
MT8820C-003 CDMA2000® Measurement Hardware
MT8820C-005 1xEV-DO Measurement Hardware *2
MT8820C-007 TD-SCDMA Measurement Hardware
MT8820C-008 LTE Measurement Hardware
MT8820C-011 Audio Board
MT8820C-012 Parallel Phone Measurement Hardware
MT8820C-017 Extended RF Hardware *1
MT8820C-018 Extended RF 3.4 GHz to 3.8 GHz (requires MT8820C-017, MT8820C-119, or MT8820C-120)
MT8820C-043 CDMA2000® Time Offset CAL for GPS SG (requires MT8820C-003 and MX882002C)
Software MX882000C W-CDMA Measurement Software (requires MT8820C-001 and MX88205xC)
MX882000C-001 W-CDMA Voice Codec (requires MT8820C-011 and MX882000C)
MX882000C-011 HSDPA Measurement Software (requires MT8820C-001, MX882000C, and MX882050C)
MX882000C-013 HSDPA High Data Rate (requires MT8820C-001, MX882000C, MX882000C-011, and MX882050C)
MX882000C-021 HSUPA Measurement Software (requires MT8820C-001, MX882000C, MX882000C-011, and MX882050C)
MX882000C-031 HSPA Evolution Measurement Software *3 (requires MT8820C-001, MX882000C, MX882000C-011, MX882000C-021, and MX882050C)
MX882000C-032 DC-HSDPA Measurement Software *3, *4(requires MT8820C-001 (2 sets), MT8820C-012, MX882000C, MX882000C-011, MX882000C-021, MX882000C-031, MX882010C, and MX882050C)
MX882001C GSM Measurement Software (requires MT8820C-002)
MX882001C-001 GSM Voice Codec (requires MT8820C-011 and MX882001C)
MX882001C-002 GSM External Packet Data (requires MX882001C)
MX882001C-011 EGPRS Measurement Software (requires MX882001C)
MX882001C-041 GSM High-speed Adjustment (requires MX882001C)
MX882002C CDMA2000® Measurement Software (requires MT8820C-003)
MX882002C-001 CDMA2000® Voice Codec (requires MT8820C-011 and MX882002C)
MX882002C-002 CDMA2000® External Packet Data (requires MX882002C)
MX882005C PHS Measurement Software (requires MT8820C-002)
MX882005C-011 Advanced PHS Measurement Software (requires MX882005C)
MX882006C 1xEV-DO Measurement Software (requires MT8820C-003, MT8820C-005, and MX882002C)
MX882006C-002 1xEV-DO External Packet Data (requires MX882006C)
MX882006C-011 1xEV-DO Rev. A Measurement Software (requires MX882006C)
MX882007C TD-SCDMA Measurement Software (requires MT8820C-001 and MT8820C-007)
MX882007C-001 TD-SCDMA Voice Codec (requires MT8820C-011 and MX882007C)
MX882007C-003 TD-SCDMA Video Phone Test (requires MX882007C)
MX882007C-011 TD-SCDMA HSDPA Measurement Software *3 (requires MT8820C-001, MT8820C-007, and MX882007C)
MX882007C-021 TD-SCDMA HSUPA Measurement Software *3 (requires MT8820C-001, MT8820C-007, MX882007C, MX882007C-011)
MX882010C Parallel Phone Measurement Software *5 (requires MT8820C-012, the two same measurement hardware [2 board/set] and one measurement software)
MX882012C LTE FDD Measurement Software *3 (requires MT8820C-008)
MX882012C-006 LTE FDD IP Data Transfer *3 (requires MX882012C)
MX882012C-011 LTE FDD 2x2 MIMO DL *3, *6 (requires MT8820C-012 and MX882012C)
MX882012C-016 LTE FDD CS Fallback to W-CDMA/GSM *7 (requires MX882012C)
MX882012C-017 LTE FDD CS Fallback to CDMA2000® *7 (requires MX882012C)
MX882012C-21 LTE-Advanced FDD DL CA Measurement Software *3, *8 (requires MT8820C-008 (2 sets), MT8820C-012, MX882010C, and MX882012C)
MX882013C LTE TDD Measurement Software *3 (requires MT8820C-008)
MX882013C-006 LTE TDD IP Data Transfer *3 (requires MX882013C)
MX882013C-011 LTE TDD 2x2 MIMO DL *3, *6 (requires MT8820C-012 and MX882013C)
MX882013C-016 LTE TDD CS Fallback to W-CDMA/GSM *9 (requires MX882013C)
MX882013C-018 LTE TDD CS Fallback to TD-SCDMA/GSM *9 (requires MX882013C)
MX882020C Sequence Measurement Software *3 (requires MT8820C-008)
MX882020C-001 W-CDMA Measurement Software *3 (requires MT8820C-008 and MX882020C)
MX882020C-002 GSM Measurement Software *3 (requires MT8820C-008 and MX882020C)
MX882020C-003 CDMA2000® Measurement Software *3 (requires MT8820C-008 and MX882020C)
MX882020C-004 LTE Measurement Software *3 (requires MT8820C-008 and MX882020C)
MX882020C-005 TD-SCDMA Measurement Software *3 (requires MT8820C-008 and MX882020C)
MX882032C CDMA2000® Measurement Software LITE *3
MX882036C 1xEV-DO Measurement Software LITE *3
MX882036C-011 1xEV-DO Rev.A Measurement Software LITE *3
MX882042C LTE FDD Measurement Software LITE *3
MX882043C LTE TDD Measurement Software LITE *3
MX882050C W-CDMA Call Processing Software *3, *11 (requires MX882000C)
MX882050C-002 W-CDMA External Packet Data *3 (requires MX882050C)
MX882050C-003 W-CDMA Video Phone Test *3 (requires MX882050C)
MX882050C-007 W-CDMA Band XII, XIII, XIV, XIX, XX, XXI *3, *11 (requires MX882050C)
MX882050C-008 W-CDMA Band XI *3 (requires MX882050C)
MX882050C-009 W-CDMA Band IX *3 (requires MX882050C)
MX882050C-011 HSDPA External Packet Data *3 (requires MX882000C-011)
MX882051C W-CDMA Call Processing Software *3 (requires MX882000C)
MX882051C-002 W-CDMA External Packet Data *3 (requires MX882051C)
MX882051C-003 W-CDMA Video Phone Test *3 (requires MX882051C)
MX882070C W-CDMA Ciphering Software *3 (requires MX882050C)
MX882071C W-CDMA Ciphering Software *3 (requires MX882051C)
Warranty Service MT8820C-ES2102 years Extended Warranty Service
MT8820C-ES3103 years Extended Warranty Service
MT8820C-ES5105 years Extended Warranty Service

*1 MT8820C-017 has been a standard option that MT8820C are shipped with until July 2012 (Simultaneous order is required MT8820C and MT8820C-017).

*2 The MT8820C-005 hardware supports both IS-856-0 (1xEV-DO Rev. 0) and IS-856-A (1xEV-DO Rev. A) RF measurements.

*3 For terminal connectivity, contact your Elecsoft sales representative.

*4 MX882000C-032 is required a Parallelphone™ measurement configuration of W-CDMA HSPA Evolution. To use 2 units of MT8820C, contact your Elecsoft sales representative.

*5 The following measurement hardware supports the Parallelphone™ measurement option: MT8820C-001, MT8820C-002, MT8820C-003, MT8820C-005, MT8820C-007, MT8820C-008. All the measurement hardware can be installed simultaneously.

*6 MX882012C-011 is required MT8820C-012.

*7 The MX882012C-016 (017) LTE FDD CS Fallback to W-CDMA/GSM (CDMA2000®) requires a separate MT8820C with the W-CDMA/GSM (CDMA2000®) configuration. Contact your Elecsoft sales representative for the CS Fallback function test configuration.

*8 MX882012C-021 is required a Parallelphone™ measurement configuration of LTE FDD. To use 2 units of MT8820C, contact your Elecsoft sales representative.

*9 The MX882013C-016 (018) LTE TDD CS Fallback to W-CDMA/GSM (TD-SCDMA/GSM) requires a separate MT8820C with the W-CDMA/GSM (TD-SCDMA/GSM) configuration. Contact your Elecsoft sales representative for the CS Fallback function test configuration.

*10 These options preinstall the integrity protection function.

*11 MX882050C-007 supports W-CDMA Band 12, 13, 14, 19, 20, 21.




Loading... in progress



Loading... in progress


Note: All trademarks that appear on this website are the property of their respective owners.


Need more information?

Chat with our Technical Support now !
or
Contact us by filling up our online form or email us directly at info@elecsoftsolution.com.
We will get back to your enquiry within the next business day.