The Perfect Test & Measurement Partner
ms2830a

Optional Built-in Analog / Vector Signal Generator (VSA)

ms2830a_3in1

MS2830A is a high-speed, high-performance, cost-effective Spectrum Analyzer/Signal Analyzer. Not only can it capture wideband signals but FFT technology supports multifunction signal analysis in both time and frequency domains. Behavior in the time domain that cannot be handled by a sweep type spectrum analyzer can be checked in the frequency domain. A wide frequency can be analyzed using sweep type spectrum analysis functions while detailed signal analysis of a specific frequency band is supported too.

The built-in signal generator function outputs both continuous wave (CW) and modulated signals for use as a reference signal source when testing Tx characteristics of parts and as a signal source for evaluating Rx characteristics.

Bundled waveform pattern: W-CDMA/HSDPA, GSM/EDGE, PDC, PHS, CDMA2000® 1x/1xEV-DO, AWGN, Bluetooth®, GPS. Broadcast (ISDB-T/BS/CS/CATV), Wireless LAN (IEEE802.11a/11b/11g) for VSA


10 Times Faster Measurement Speed

PLAY VIDEO ms2830a_fast

The MS2830A Signal Analyzer supports very high-speed spectrum analyzer functions, such as sweeping and frequency switching time.

Vector Signal Analyzer Mode

Using the VSA mode with advanced DSP and FFT technologies cuts in-band and out-of-band spurious measurement times by 90% (compared to previous models) to greatly improve manufacturing and adjustment throughput.

The MS2830A performs in-band measurements, such as ACP, OBT and Channel Power, many times faster than sweep spectrum analyzers by using FFT batch capture and analysis over a 125-MHz bandwidth and measurement interval.

Spectrum Analyzer Mode

Local measurement and display update : 2.1ms (SWT: 1ms)
: 0.7ms (SWT: 100us)
Remote measurement and LAN transfer : 4.0ms
Marker peak search : 1.5ms
Center frequency tune + sweep + sweep data transfer
(RF/Micro band)
: 12ms

Best-of-class Dynamic Range at Medium-class Price: 168 dB*1 @ 1 GHz

ms2830a_DANL

VBW = 1 Hz (Video Average), Input attenuator 0 dB without MS2830A-008, or Preamp: Off

Frequency Max TOI Max DANL Dynamic Range
300 MHz to 1.0 GHz +15 dBm -153 dBm/Hz 168 dB
1.0 GHz to 2.4 GHz +15 dBm -151 dBm/Hz 166 dB
2.4 GHz to 3.5 GHz +15 dBm -149 dBm/Hz 164 dB
3.5 GHz to 6.0 GHz +14 dBm -146 dBm/Hz 160 dB
6.0 GHz to 13.5 GHz +10 dBm -142 dBm/Hz 152 dB

The MS2830A has an excellent dynamic range supporting true performance measurements of devices, such as base stations, requiring wideband measuring instruments.

*1 Difference between Third Order Intercept point (TOI) and Displayed Average Noise Level (DANL) as a simple guide


Excellent Total Level Accuracy: ±0.3 dB (typ.)*2

ms2830a_accuracy

MS2830A Level Calibration technology assures excellent level accuracy over a wide frequency range from 300 kHz to 4 GHz even under measurement conditions including the above three errors. It has built-in amplitude/phase calibration circuits to automatically calibrate out internal errors.

The MS2830A's Total Level Accuracy includes Frequency Characteristics, Linearity and Attenuator Switching Error, where most other spectrum analyzers does not include.

The level accuracy is assured even when the frequency and attenuator are switched. Better accuracy translates to better yield and less down time.

*2 Vector Signal Analyzer is ± 0.5dB (typ)


SSB Low Phase Noise Performance

ms2830a_dynamic_range

SSB phase noise performance is increasingly important at carrier offsets of 1 kHz to 100 kHz. Spectrum analyzer phase noise performance affects ACLR/MASK measurements at narrowband communications. (Channel bandwidth : <100 kHz) The superior ACLR performance is useful for Tx tests of devices such as amplifiers.

With SSB phase noise performace of -120 dBc/Hz @ 10-kHz offset, MS2830A is able to achieve F3E out-of-band/proximity spurious for the worst-case standard under all conditions measurements (e.g Land Mobile Radio - LMR).



RR(Radio Regulations) was revised based on ITU(International Telecommunication Union) Recommendation.


Versatile Built-in Functions

Channel Power Spectrum Emission Mask*4 AM Depth*5
Occupied Bandwidth Spurious Emission*4 FM Deviation*5
Adjacent Channel Leakage Power Frequency Counter*4 Power Meter*6
Burst Average Power Limit Line*4 Phase Noise*7
Multi-marker & marker List 2-tone 3rd-order Intermodulation Distortion (IMD3)*4 Noise Figure*8
Highest 10 Markers
*5 Signal Analyzer Function Required *7 Phase Noise Measurement Function Required
*4 Spectrum Analyzer Function Required *6 Power Meter Function Required *8 Noise Figure Measurement Function Required
Download MS2830A Brochures for more information

Excellent Expandability Options (Future Proof Platform)

Rubidium Reference Oscillator Analog Measurement Software LTE Downlink Measurement Software
Analysis Bandwidth 10/31.25/62.5/125 MHz Vector Modulation Analysis Software LTE-Advanced FDD Downlink Measurement Software
Phase Noise Measurement Function Mobile WiMAX® Measurement Software LTE Uplink Measurement Software
Noise Figure Measurement Function W-CDMA/HSPA Downlink Measurement Software LTE TDD Downlink Measurement Software
BER Measurement Function W-CDMA/HSPA Uplink Measurement Software LTE-Advanced TDD Downlink Measurement Software
Low Phase Noise Performance GSM/EDGE Measurement Software LTE TDD Uplink Measurement Software
Precompliance EMI Function EDGE Evolution Measurement Software
TD-SCDMA Measurement Software IQproducer™:
Wireless Network Device Test Software CDMA2000® Forward Link Measurement Software HSDPA/HSUPA, TDMA, Multi-Carrier, Mobile WiMAX®
WLAN Test Software EV-DO Forward Link Measurement Software LTE, LTE-Advanced FDD, LTE TDD, LTE-Advanced TDD, WLAN, 802.11ac
Bluetooth® Test Software All Measure Function (Requires MX269024A) TD-SCDMA, 1xEV-DO Reverse Receiver Test Waveform Pattern
W-CDMA BS Measurement Software WLAN (802.11) Measurement Software

Pre-installed Patterns (Free): W-CDMA, HSDPA (Test Model5), CDMA2000® 1xEV-DO, CDMA2000®, GSM/EDGE, Digital Broadcasting (ISDB-T/CS/BS/CATV), WLAN (IEEE802.11a/b/g) and Bluetooth®

Supports modulation analysis, such as 3GPP LTE/LTE-Advanced (FDD/TDD), Mobile WiMAX®, WLAN IEEE802.11a/11b/11g/11j/11n/11p and 11ac (with optional software)

More Options Information

Low Power Consumption and an Excellent Eco Product

eco_friendly

The MS2830A meets Anritsu "Excellent Eco Products" standard for environment-friendly products. It cuts consumed power by 50% compared to conventional models.

Power Consumption:

≤350 VA (including all options)
110 VA (nominal, MS2830A-040, 3.6 GHz)*9
110 VA (nominal, MS2830A-041, 6 GHz)*9
130 VA (nominal, MS2830A-043, 13.5 GHz)*9

*9 Excludes other options


Download MS2830A Brochures for more features


Basic Performance

Parameters / Characteristics Specifications
Frequency Frequency range 9 kHz to 3.6 GHz (MS2830A-040)
9 kHz to 6 GHz (MS2830A-041)
9 kHz to 13.5 GHz (MS2830A-043)
SSB phase noise (500 MHz) +18° to +28°C
-115 dBc/Hz (100 kHz offset)
-133 dBc/Hz (1 MHz offset)
-109 dBc/Hz (1 kHz offset, with opt. 066)
-118 dBc/Hz (10 kHz offset, with opt. 066)
-133 dBc/Hz (100 kHz offset, with opt. 066)
SSB phase noise (220 MHz) -122 dBc/Hz (25 kHz offset, with opt. 066)
General Dimensions and mass 426 (W) x 177 (H) x 390 (D) mm (Exclude surface projection)
≤14.5 kg (with MS2830A-040/041, and MS2830A-020/021, exclude other options)
≤13.5 kg (with MS2830A-043, exclude other options)

Spectrum Analyzer Function

Parameters / Characteristics Specifications
Frequency Resolution bandwidth (RBW) Setting range: 1 Hz to 3 MHz (1-3 sequence), 50 kHz, 5 MHz, 10 MHz, 20 MHz, 31.25 MHz
Resolution bandwidth (CISPR RBW) with MS2830A-016
Setting range: 200 Hz (6 dB), 9 kHz (6 dB), 120 kHz (6 dB), 1 MHz (Impulse)
Amplitude Displayed average noise level (DANL) +18° to +28°C
Detector = Sample, VBW = 1 Hz (Video Average), Input attenuator 0 dB without MS2830A-008, or Preamp: Off
-134 dBm/Hz (100 kHz)
-144 dBm/Hz (1 MHz)
-153 dBm/Hz (30 MHz ≤ f < 1 GHz)
-151 dBm/Hz (1 GHz ≤ f < 2.4 GHz)
-149 dBm/Hz (2.4 GHz ≤ f ≤ 3.5 GHz)
-146 dBm/Hz (3.5 GHz < f ≤ 6 GHz), [MS2830A-041/043]
-142 dBm/Hz (6 GHz < f ≤ 13.5 GHz), [MS2830A-043]
Total absolute amplitude accuracy +18° to +28°C
±0.5 dB (300 kHz ≤ f < 4 GHz, Frequency band mode: Normal)
             (300 kHz ≤ f < 3.5 GHz, Frequency band mode: Spurious)
±1.8 dB (4 GHz ≤ f ≤ 13.5 GHz, Frequency band mode: Normal)
             (3.5 GHz ≤ f ≤ 13.5 GHz, Frequency band mode: Spurious)
Spurious responses 2-tone 3rd-order intermodulation distortion +18° to +28°C
≥300 kHz separation without MS2830A-008, or Preamp: Off, Mixer input level: -15 dBm (1wave)
TOI = +12 dBm (30 MHz ≤ f < 300 MHz)
TOI = +15 dBm (300 MHz ≤ f < 3.5 GHz)
TOI = +14 dBm (3.5 GHz ≤ f ≤ 6 GHz)
TOI = +10 dBm (6 GHz < f ≤ 13.5 GHz)

Vector Signal Analysis (VSA) Function

Parameters / Characteristics Specifications
General Trace mode Spectrum, Power vs. Time, Frequency vs. Time, Phase vs. Time, CCDF, Spectrogram, No Trace
Analysis bandwidth 1 kHz to 10 MHz (1-2.5-5 sequence), [with MS2830A-006]
1 kHz to 25 MHz (1-2.5-5 sequence), 31.25MHz, [with MS2830A-005]
1 kHz to 25 MHz (1-2.5-5 sequence), 31.25 MHz, 50 MHz, 62.5 MHz [with MS2830A-077]
1 kHz to 25 MHz (1-2.5-5 sequence), 31.25 MHz, 50 MHz, 62.5 MHz, 100 MHz, 125 MHz [with MS2830A-078]
Note: An image response is received when setting the bandwidth to more than 31.25 MHz.
          This can be used when not inputting a signal frequency outside the MS2830A analysis bandwidth (125 MHz max.).
          The MS2690A/91A/92A Signal Analyzer series is recommended for other measurement purposes.
Sampling rate 2 kHz to 20 MHz (1-2-5 sequence), [with MS2830A-006]
2 kHz to 50 MHz (1-2-5 sequence), [with MS2830A-005]
2 kHz to 100 MHz (1-2-5 sequence), [with MS2830A-077]
2 kHz to 200 MHz (1-2-5 sequence), [with MS2830A-078]
Maximum capture time 0.5 s to 2000 s (determined according to analysis bandwidth)
Spectrum displayed function Resolution bandwidth (RBW) Setting range: 1 Hz to 1 MHz (1-3 sequence), [without MS2830A-077/078, or ≤31.25 MHz bandwidth]
Setting range: 1 Hz to 3 MHz (1-3 sequence), [with MS2830A-077, >31.25 MHz bandwidth]
Setting range: 1 Hz to 10 MHz (1-3 sequence), [with MS2830A-078, >31.25 MHz bandwidth]
Displayed average noise level (DANL) +18° to +28°C
without MS2830A-008, or with MS2830A-008, Preamp: Off
-131.5 dBm/Hz (100 kHz)
-141.5 dBm/Hz (1 MHz)
-150.5 dBm/Hz (30 MHz ≤ f < 1 GHz)
-148.5 dBm/Hz (1 GHz ≤ f < 2.4 GHz)
-146.5 dBm/Hz (2.4 GHz ≤ f ≤ 3.5 GHz)
-143.5 dBm/Hz (3.5 GHz < f ≤ 6 GHz), [MS2830A-041/043]
-139.5 dBm/Hz (6 GHz < f ≤ 13.5 GHz), [MS2830A-043]
Total absolute amplitude accuracy +18° to +28°C
±0.5 dB (300 kHz ≤ f < 4 GHz, Frequency band mode: Normal)
             (300 kHz ≤ f < 3.5GHz, Frequency band mode: Spurious)
±1.8 dB (4 GHz ≤ f ≤ 13.5 GHz, Frequency band mode: Normal)
             (3.5 GHz ≤ f ≤ 13.5 GHz, Frequency band mode: Spurious)
Measure function Adjacent channel power (ACP), Channel power, Occupied bandwidth (OBW)
Digitize function Captured waveform data (each 32 bit, Float binary type) saved to internal HDD or output to external devices

MS2830A-020/021 Vector Signal Generator

Parameters / Characteristics Specifications
Frequency Range 250 kHz to 3.6 GHz [MS2830A-020]
250 kHz to 6 GHz [MS2830A-021]
Resolution 0.01 Hz
Output level Setting range -40 to +20 dBm (>25 MHz), -40 to +2 dBm (≤25 MHz) [without MS2830A-022]
-136 to +15 dBm (>25 MHz), -136 to -3 dBm (≤25 MHz) [with MS2830A-022]
Resolution 0.01 dB
Output level accuracy +18° to +28°C
without MS2830A-022
   ±0.5 dB (typ., 25 MHz < f < 375 MHz)  -40 dBm ≤ p ≤ +9 dBm
   ±0.5 dB (375 MHz ≤ f ≤ 3.6 GHz)  -40 dBm ≤ p ≤ +9 dBm
   ±0.8 dB (>3.6 GHz)  -40 dBm ≤ p ≤ +4 dBm
 with MS2830A-022
   ±0.5 dB (typ., 100 MHz ≤ f < 375 MHz)  -110 dBm ≤ p ≤ +4 dBm
   ±0.5 dB (375 MHz ≤ f ≤ 3.6 GHz)  -110 dBm ≤ p ≤ +4 dBm
   ±0.8 dB (>3.6 GHz)  -110 dBm ≤ p ≤ -1 dBm
   ±1.0 dB (100 MHz ≤ f ≤ 3.6 GHz)  -120 dBm ≤ p < -110 dBm
   ±1.0 dB (typ., 100 MHz ≤ f ≤ 3.6 GHz)  -127 dBm ≤ p < -120 dBm
   ±2.5 dB (typ., >3.6 GHz)  -127 dBm ≤ p < -110 dBm
Linearity 18° to 28°C,
CW without MS2830A-022, Referenced to -10 dBm output
±0.2 dB (typ., ≤3.6 GHz)  -40 dBm ≤ p ≤ -10 dBm
±0.3 dB (typ., >3.6 GHz)  -40 dBm ≤ p ≤ -10 dBm
Arbitrary waveform generator Waveform resolution 14/15/16 bits
Internal baseband reference clock Range: 20 kHz to 160 MHz, Resolution: 0.001 Hz
Waveform memory 64 Msamples
256 Msamples (MS2830A-027)
RF Modulation Bandwidth 120 MHz (Pre-installed Baseband Generator)
Download MS2830A Brochures for complete specifications




Options Descriptions / Documentations
Hardware MS2830A Main Frame
MS2830A-040 3.6 GHz Signal Analyzer
MS2830A-041 6 GHz Signal Analyzer
MS2830A-043 13.5 GHz Signal Analyzer
MS2830A-001 Rubidium Reference Oscillator
MS2830A-002 High Stability Reference Oscillator
MS2830A-005 Analysis Bandwidth Extension to 31.25 MHz
MS2830A-006 Analysis Bandwidth 10 MHz
MS2830A-077 Analysis Bandwidth Extension to 62.5 MHz (Requires opt.006, 005)
MS2830A-078 Analysis Bandwidth Extension to 125 MHz (Requires opt.006, 005, 077)
MS2830A-008 Preamplifier
MS2830A-010 Phase Noise Measurement Function
MS2830A-011 2ndary HDD
MS2830A-016 Precompliance EMI Function
MS2830A-017 Noise Figure Measurement Function
MS2830A-026 BER Measurement Function
MS2830A-066 Low Phase Noise Performance
MS2830A-020 3.6 GHz Vector Signal Generator
MS2830A-021 6 GHz Vector Signal Generator
MS2830A-022 Low Power Extension for Vector Signal Generator
MS2830A-027 ARB Memory Upgrade 256 Msa for Vector Signal Generator
MS2830A-028 AWGN
MS2830A-029 Analog Function Extension for Vector Signal Generator
MS2830A-088 3.6GHz Analog Signal Generator
MS2830A-188 3.6GHz Analog Signal Generator Retrofit
MS2830A-189 Vector Function Extension for Analog Signal Generator Retrofit
Software
(Measurement software for Signal Analyzer)
MX269010A Mobile WiMAX® Measurement Software
MX269011A W-CDMA/HSPA Downlink Measurement Software
MX269012A W-CDMA/HSPA Uplink Measurement Software
MX269013A GSM/EDGE Measurement Software
MX269013A-001 EDGE Evolution Measurement Software
MX269015A TD-SCDMA Measurement Software
MX269017A Vector Modulation Analysis Software
MX269018A Analog Measurement Software
MX269020A LTE Downlink Measurement Software
MX269020A-001 LTE-Advanced FDD Downlink Measurement Software
MX269021A LTE Uplink Measurement Software
MX269022A LTE TDD Downlink Measurement Software
MX269022A-001 LTE-Advanced TDD Downlink Measurement Software
MX269023A LTE TDD Uplink Measurement Software
MX269024A CDMA2000® Forward Link Measurement Software
MX269024A-001 All Measure Function   NEW
MX269026A EV-DO Forward Link Measurement Software
MX269026A-001 All Measure Function   NEW
MX269028A WLAN (802.11) Measurement Software
MX269028A-001 802.11ac (80 MHz) Measurement Software
MX269030A W-CDMA BS Measurement Software
MX283027A Wireless Network Device Test Software
MX283027A-001 WLAN Test Software
MX283027A-002 Bluetooth® Test Software
MX283087A TRX Sweep Calibration   NEW
Software
(Software for waveform pattern generation for vector signal generator)
MX269901A HSDPA/HSUPA IQproducer™
MX269902A TDMA IQproducer™
MX269904A Multi-Carrier IQproducer™
MX269905A Mobile WiMAX® IQproducer™
MX269908A LTE IQproducer™
MX269908A-001 LTE-Advanced FDD Option
MX269910A LTE TDD IQproducer™
MX269910A-001 LTE-Advanced TDD Option
MX269911A WLAN IQproducer™
MX269911A-001 802.11ac (80 MHz) Option
MX269912A TD-SCDMA IQproducer™
MX269970A 1xEV-DO Reverse Receiver Test Waveform Pattern   NEW
Warranty service MS2830A-ES2102 years Extended Warranty Service
MS2830A-ES3103 years Extended Warranty Service
MS2830A-ES5105 years Extended Warranty Service



Loading... in progress



Loading... in progress



Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


ms2830a

Standard Local Output (LO) Port for External Mixer Measures up to 110 GHz

ms2830a-044-045_2in1.jpg

The MS2830A-044/045 Signal Analyzer includes a spectrum analyzer function for measuring up to 110 GHz using an external mixer based on the 26.5 GHz / 43 GHz upper frequency limit. It can be customized to support a range of application-specific measurements.

  • The signal analyzer mode can catch the instant change of the frequency/phase/amplitude/spectrum of the microwave signals.
  • Installing a microwave-band preamp supports measurement of weaker signals.
  • Using the 1st IF signal output as a down converter supports analysis in combination with external equipment.


10 Times Faster Measurement Speed

PLAY VIDEO ms2830a_fast

The MS2830A Signal Analyzer supports very high-speed spectrum analyzer functions, such as sweeping and frequency switching time.

Vector Signal Analyzer Mode

Using the VSA mode with advanced DSP and FFT technologies cuts in-band and out-of-band spurious measurement times by 90% (compared to previous models) to greatly improve manufacturing and adjustment throughput.

The MS2830A performs in-band measurements, such as ACP, OBT and Channel Power, many times faster than sweep spectrum analyzers by using FFT batch capture and analysis over a 125-MHz bandwidth and measurement interval.

Spectrum Analyzer Mode

Local measurement and display update : 2.1ms (SWT: 1ms)
: 0.7ms (SWT: 100us)
Remote measurement and LAN transfer : 4.0ms
Marker peak search : 1.5ms
Center frequency tune + sweep + sweep data transfer
(RF/Micro band)
: 12ms

Best-of-class Dynamic Range at Medium-class Price: 157 dB*1 @ 40 GHz

ms2830a_DANL

VBW = 1 Hz (Video Average), Input attenuator 0 dB without MS2830A-067/068

Frequency Max TOI Max DANL Dynamic Range
300 MHz to 1.0 GHz +15 dBm -153 dBm/Hz 168 dB
1.0 GHz to 2.4 GHz +15 dBm -150 dBm/Hz 165 dB
2.4 GHz to 3.5 GHz +15 dBm -147 dBm/Hz 162 dB
3.5 GHz to 6.0 GHz +14 dBm -144 dBm/Hz 158 dB
6.0 GHz to 13.5 GHz +13 dBm -151 dBm/Hz 164 dB
13.5 GHz to 26.5 GHz +13 dBm -146 dBm/Hz 159 dB
26.5 GHz to 40.0 GHz +13 dBm -144 dBm/Hz 157 dB

The MS2830A has an excellent dynamic range supporting true performance measurements of devices, such as base stations, requiring wideband measuring instruments.

*1 Difference between Third Order Intercept point (TOI) and Displayed Average Noise Level (DANL) as a simple guide


ms2830a_accuracy

Excellent Total Level Accuracy:

±0.5 dB (300 kHz ≤ f ≤ 4 GHz)

±1.8 dB (4 GHz ≤ f ≤ 13.8 GHz)

±3.0 dB (13.8 GHz ≤ f ≤ 40 GHz)

MS2830A Level Calibration technology assures excellent level accuracy over a wide frequency range from 300 kHz to 4 GHz even under measurement conditions including the above three errors. It has built-in amplitude/phase calibration circuits to automatically calibrate out internal errors.

The MS2830A's Total Level Accuracy includes Frequency Characteristics, Linearity and Attenuator Switching Error, where most other spectrum analyzers does not include.

The level accuracy is assured even when the frequency and attenuator are switched. Better accuracy translates to better yield and less down time.


SSB Low Phase Noise Performance

ms2830a_dynamic_range

SSB phase noise performance is increasingly important at carrier offsets of 1 kHz to 100 kHz. Spectrum analyzer phase noise performance affects ACLR/MASK measurements at narrowband communications. (Channel bandwidth : <100 kHz) The superior ACLR performance is useful for Tx tests of devices such as amplifiers.

With SSB phase noise performace of -120 dBc/Hz @ 10-kHz offset, MS2830A is able to achieve F3E out-of-band/proximity spurious for the worst-case standard under all conditions measurements (e.g Land Mobile Radio - LMR).



RR(Radio Regulations) was revised based on ITU(International Telecommunication Union) Recommendation.


Versatile Built-in Functions

Channel Power Spectrum Emission Mask*4 AM Depth*5
Occupied Bandwidth Spurious Emission*4 FM Deviation*5
Adjacent Channel Leakage Power Frequency Counter*4 Power Meter*6
Burst Average Power Limit Line*4 Phase Noise*7
Multi-marker & marker List 2-tone 3rd-order Intermodulation Distortion (IMD3)*4 Noise Figure*8
Highest 10 Markers
*5 Signal Analyzer Function Required *7 Phase Noise Measurement Function Required
*4 Spectrum Analyzer Function Required *6 Power Meter Function Required *8 Noise Figure Measurement Function Required
Download MS2830A Brochures for more information

Excellent Expandability Options (Future Proof Platform)

Rubidium Reference Oscillator Analog Measurement Software LTE Downlink Measurement Software
Analysis Bandwidth 10/31.25/62.5/125 MHz Vector Modulation Analysis Software LTE-Advanced FDD Downlink Measurement Software
Phase Noise Measurement Function Mobile WiMAX® Measurement Software (MS2830A-044 only) LTE Uplink Measurement Software
Noise Figure Measurement Function W-CDMA/HSPA Downlink Measurement Software LTE TDD Downlink Measurement Software
BER Measurement Function W-CDMA/HSPA Uplink Measurement Software LTE-Advanced TDD Downlink Measurement Software
Low Phase Noise Performance GSM/EDGE Measurement Software LTE TDD Uplink Measurement Software
Precompliance EMI Function EDGE Evolution Measurement Software
TD-SCDMA Measurement Software IQProducer™:
Wireless Network Device Test Software CDMA2000® Forward Link Measurement Software HSDPA/HSUPA, TDMA, Multi-Carrier, Mobile WiMAX®
WLAN Test Software EV-DO Forward Link Measurement Software LTE, LTE-Advanced FDD, LTE TDD, LTE-Advanced TDD, WLAN, 802.11ac
Bluetooth® Test Software All Measure Function (Requires MX269024A) TD-SCDMA, 1xEV-DO Reverse Receiver Test Waveform Pattern
TRX Sweep Calibration W-CDMA BS Measurement Software WLAN (802.11) Measurement Software

Pre-installed Patterns (Free): W-CDMA, HSDPA (Test Model5), CDMA2000® 1xEV-DO, CDMA2000®, GSM/EDGE, Digital Broadcasting (ISDB-T/CS/BS/CATV), WLAN (IEEE802.11a/b/g) and Bluetooth®

Supports modulation analysis, such as 3GPP LTE/LTE-Advanced (FDD/TDD), Mobile WiMAX®, WLAN IEEE802.11a/11b/11g/11j/11n/11p and 11ac (with optional software)

More Options Information

Low Power Consumption and an Excellent Eco Product

eco_friendly

The MS2830A meets Anritsu "Excellent Eco Products" standard for environment-friendly products. It cuts consumed power by 50% compared to conventional models.

Power Consumption:

≤350 VA (including all options)
190 VA (nominal, MS2830A-044, 26.5 GHz)*9
190 VA (nominal, MS2830A-045, 43 GHz)*9

*9 Excludes other options


Download MS2830A Brochures for more features


Basic Performance

Parameters / Characteristics Specifications
Frequency Frequency range 9 kHz to 26.5 GHz (MS2830A-044)
9 kHz to 43 GHz (MS2830A-045)
SSB phase noise (500 MHz) +18° to +28°C
-115 dBc/Hz (100 kHz offset)
-133 dBc/Hz (1 MHz offset)
General Dimensions and mass 426 (W) x 177 (H) x 390 (D) mm (Exclude surface projection)
≤15 kg (exclude other options)

Spectrum Analyzer Function

Parameters / Characteristics Specifications
Frequency Resolution bandwidth (RBW) Setting range: 1 Hz to 3 MHz (1-3 sequence), 50 kHz, 5 MHz, 10 MHz, 20 MHz*, 31.25 MHz*
*Can be set when with MS2830A-005, Can not be set when with MS2830A-009
Resolution bandwidth (CISPR RBW) with MS2830A-016
Setting range: 200 Hz (6 dB), 9 kHz (6 dB), 120 kHz (6 dB), 1 MHz (Impulse)
Amplitude Displayed average noise level (DANL) +18° to +28°C
Detector: Sample, VBW:1 Hz (Video average), Input attenuator: 0 dB without MS2830A-067/068, Frequency band mode: Normal
-134 dBm/Hz (100 kHz)
-144 dBm/Hz (1 MHz)
-153 dBm/Hz (30 MHz ≤ f < 1 GHz)
-150 dBm/Hz (1 GHz ≤ f < 2.4 GHz)
-147 dBm/Hz (2.4 GHz ≤ f ≤ 3.5 GHz)
-144 dBm/Hz (3.5 GHz < f ≤ 4 GHz)
-144 dBm/Hz (4 GHz < f ≤ 6 GHz)
-147 dBm/Hz (6 GHz < f ≤ 13.5 GHz)
-145 dBm/Hz (13.5 GHz < f ≤ 18.3 GHz)
-141 dBm/Hz (18.3 GHz < f ≤ 26.5 GHz)
-141 dBm/Hz (26.5 GHz < f ≤ 34 GHz)
-135 dBm/Hz (34 GHz < f ≤ 40 GHz)
-132 dBm/Hz (40 GHz < f ≤ 43 GHz)
Total absolute amplitude accuracy +18° to +28°C
±0.5 dB (300 kHz ≤ f < 4 GHz, Frequency band mode: Normal)
             (300 kHz ≤ f < 3.5 GHz, Frequency band mode: Spurious)
±1.8 dB (4 GHz ≤ f ≤ 13.5 GHz, Frequency band mode: Normal)
             (3.5 GHz ≤ f ≤ 13.5 GHz, Frequency band mode: Spurious)
±3.0 dB (13.8 GHz < f ≤ 26.5 GHz)
±3.0 dB (26.5 GHz < f ≤ 40 GHz)
±3.5 dB (nominal, 40 GHz < f ≤ 43 GHz)
Spurious responses 2-tone 3rd-order intermodulation distortion +18° to +28°C
≥300 kHz separation without MS2830A-008, or Preamp: Off, Mixer input level: -15 dBm (1wave)
TOI = +12 dBm (30 MHz ≤ f < 300 MHz)
TOI = +15 dBm (300 MHz ≤ f < 3.5 GHz)
TOI = +14 dBm (3.5 GHz ≤ f ≤ 6 GHz, Frequency band mode: Normal)
TOI = +13 dBm (6 GHz < f ≤ 13.5 GHz)
TOI = +13 dBm (13.5 GHz < f ≤ 26.5 GHz)
TOI = +13 dBm (nominal, 26.5 GHz < f ≤ 40 GHz)

Vector Signal Analysis (VSA) Function

Parameters / Characteristics Specifications
General Trace mode Spectrum, Power vs. Time, Frequency vs. Time, Phase vs. Time, CCDF, Spectrogram, No Trace
Analysis bandwidth 1 kHz to 10 MHz (1-2.5-5 sequence), [with MS2830A-006]
1 kHz to 25 MHz (1-2.5-5 sequence), 31.25MHz, [with MS2830A-005, or with MS2830A-009]
1 kHz to 25 MHz (1-2.5-5 sequence), 31.25 MHz, 50 MHz, 62.5 MHz [with MS2830A-077]
1 kHz to 25 MHz (1-2.5-5 sequence), 31.25 MHz, 50 MHz, 62.5 MHz, 100 MHz, 125 MHz [with MS2830A-078]
Note: An image response is received when setting the bandwidth to more than 31.25 MHz.
          This can be used when not inputting a signal frequency outside the MS2830A analysis bandwidth (125 MHz max.).
          The MS2690A/91A/92A Signal Analyzer series is recommended for other measurement purposes.
Sampling rate 2 kHz to 20 MHz (1-2-5 sequence), [with MS2830A-006]
2 kHz to 50 MHz (1-2-5 sequence), [with MS2830A-005, or with MS2830A-009]
2 kHz to 100 MHz (1-2-5 sequence), [with MS2830A-077]
2 kHz to 200 MHz (1-2-5 sequence), [with MS2830A-078]
Maximum capture time 0.5 s to 2000 s (determined according to analysis bandwidth)
Spectrum displayed function Resolution bandwidth (RBW) Setting range: 1 Hz to 1 MHz (1-3 sequence), [without MS2830A-077/078, or ≤31.25 MHz bandwidth]
Setting range: 1 Hz to 3 MHz (1-3 sequence), [with MS2830A-077, >31.25 MHz bandwidth]
Setting range: 1 Hz to 10 MHz (1-3 sequence), [with MS2830A-078, >31.25 MHz bandwidth]
Displayed average noise level (DANL) without MS2830A-067/068, Frequency band mode: Normal,
-131.5 dBm/Hz (100 kHz)
-141.5 dBm/Hz (1 MHz)
-150.5 dBm/Hz (30 MHz ≤ f < 1 GHz)
-147.5 dBm/Hz (1 GHz ≤ f < 2.4 GHz)
-144.5 dBm/Hz (2.4 GHz ≤ f ≤ 3.5 GHz)
-141.5 dBm/Hz (3.5 GHz < f ≤ 4 GHz)
-141.5 dBm/Hz (4 GHz < f ≤ 6 GHz)
-148.5 dBm/Hz (6 GHz < f ≤ 13.5 GHz
-146.5 dBm/Hz (13.5 GHz < f ≤ 18.3 GHz)
-143.5 dBm/Hz (18.3 GHz < f ≤ 26.5 GHz)
-143.5 dBm/Hz (26.5 GHz < f ≤ 34 GHz)
-141.5 dBm/Hz (34 GHz < f ≤ 40 GHz)
-137.5 dBm/Hz (40 GHz < f ≤ 43 GHz)
Total absolute amplitude accuracy +18° to +28°C
without MS2830A-068, or Preamp: Off
±0.5 dB (300 kHz ≤ f < 4 GHz, Frequency band mode: Normal)
             (300 kHz ≤ f < 3.5GHz, Frequency band mode: Spurious)
±1.8 dB (4 GHz ≤ f ≤ 13.8 GHz, Frequency band mode: Normal)
             (3.5 GHz ≤ f ≤ 13.8 GHz, Frequency band mode: Spurious)
±3.0 dB (13.8 GHz ≤ f < 26.5 GHz)
±3.0 dB (26.5 GHz ≤ f < 40 GHz)
±3.5 dB (40 GHz ≤ f < 43 GHz)
Measure function Adjacent channel power (ACP), Channel power, Occupied bandwidth (OBW)
Digitize function Captured waveform data saved to internal HDD or output to external devices
Download MS2830A Brochures for complete specifications




Options Descriptions / Documentations
Hardware MS2830A Main Frame
MS2830A-044 26.5 GHz Signal Analyzer
MS2830A-045 43 GHz Signal Analyzer
MS2830A-001 Rubidium Reference Oscillator
MS2830A-005 Analysis Bandwidth Extension to 31.25 MHz
MS2830A-006 Analysis Bandwidth 10 MHz
MS2830A-009 Bandwidth Extension to 31.25 MHz for Millimeter-wave (for MS2830A-045)
MS2830A-077 Analysis Bandwidth Extension to 62.5 MHz (Requires opt.006, 005)
MS2830A-078 Analysis Bandwidth Extension to 125 MHz (Requires opt.006, 005, 077)
MS2830A-008 Preamplifier
MS2830A-010 Phase Noise Measurement Function
MS2830A-011 2ndary HDD
MS2830A-016 Precompliance EMI Function
MS2830A-017 Noise Figure Measurement Function
MS2830A-026 BER Measurement Function
MS2830A-067 Microwave Preselector Bypass
MS2830A-068 Microwave Preamplifier
Software
(Measurement software for Signal Analyzer)
MX269011A W-CDMA/HSPA Downlink Measurement Software
MX269012A W-CDMA/HSPA Uplink Measurement Software
MX269013A GSM/EDGE Measurement Software
MX269013A-001 EDGE Evolution Measurement Software
MX269015A TD-SCDMA Measurement Software
MX269017A Vector Modulation Analysis Software
MX269020A LTE Downlink Measurement Software
MX269020A-001 LTE-Advanced FDD Downlink Measurement Software
MX269021A LTE Uplink Measurement Software
MX269022A LTE TDD Downlink Measurement Software
MX269022A-001 LTE-Advanced TDD Downlink Measurement Software
MX269023A LTE TDD Uplink Measurement Software
MX269024A CDMA2000® Forward Link Measurement Software
MX269024A-001 All Measure Function   NEW
MX269026A EV-DO Forward Link Measurement Software
MX269026A-001 All Measure Function   NEW
MX269028A WLAN (802.11) Measurement Software
MX269028A-001 802.11ac (80 MHz) Measurement Software
MX269030A W-CDMA BS Measurement Software
MX283027A Wireless Network Device Test Software
MX283027A-001 WLAN Test Software
MX283027A-002 Bluetooth® Test Software
Warranty service MS2830A-ES2102 years Extended Warranty Service
MS2830A-ES3103 years Extended Warranty Service
MS2830A-ES5105 years Extended Warranty Service



Loading... in progress



Loading... in progress



Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


ms269xa

Option Vector Signal Generator (125 MHz to 6.0 GHz)

ms269xa_2in1.jpg

MS269xA Series Signal Analyzers are the latest high performance signal analyzers for next-generation communication applications. The MS269xA Series Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution.

The MS269xA Series Signal Analyzers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz /125 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification! These boxes are superlative in every way -- they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.



Ultra-High Speed ACLR Measurement

PLAY VIDEO ms269xa_fast

Averaging is a common technique for obtaining stable measurement results when measuring adjacent channel leakage power ratio (ACLR) and occupied bandwidth (OBW) using a spectrum analyzer. The MS269xA Signal Analyzer supports these measurements at high speed by using a capture function.


Capture Function Requires No Averaging

Ex. 1 : Measurement using conventional spectrum analyzer.
The spectrum analyzer requires more time to measure because it must sweep for the number of averaging times.
Ex. 2 : Measurement using signal analyzer.
The signal analyzer performs high-speed measurement even at the same number of averaging times by capturing the entire in-band data at one time. (8x high speed).
Ex. 3 : Batch capture measurement using signal analyzer.
The signal analyzer performs ultra-high-speed measurement by capturing data once for the measurement time equivalent to the averaging times, eliminating the need for averaging. (65x ultra-high-speed)

* The above measurement time is calculated from the time required for 100 measurements.




Measurement Principle:

ms269xa_batch_capture

The signal analyzer function cuts the measurement time from 2.6s to 0.04s (65x faster) compared to using a conventional spectrum analyzer.

When the Spectrum Analyzer (Ex. 1) sweep time is 95 Ás and number of display points is 1001, the time per display point is about 95 Ás. To obtain about the same accuracy for one measurement with the Spectrum Analyzer at the Signal Analyzer (Ex. 2), set Analysis Length to 95 Ás. Additionally, set Analysis Length to 1900 Ás (95 Ás x 20 times) to obtain the accuracy for 20 measurement using the Spectrum Analyzer as shown in Ex. 3.


Advantage of Ultra-High-Speed ACLR Measurement


Amplifier adjustment is laborious work (adjustment < > confirmation) requiring confirmation of various performance items, such as the distortion compensation circuit, current adjustment, and frequency characteristics. As a result, careful ACLR adjustment requires a lot of time.

In particular, amplifiers for high-performance base stations require several performance adjustments. Using the MS269xA cuts the work time by a factor of 10.


Top-class Dynamic Range: 177 dB*1 @ 2.4 GHz

ms2830a_DANL

VBW = 1 Hz (Video Average), Input attenuator = 0 dB without MS2692A-067/167

Frequency Max TOI Max DANL Dynamic Range
30 MHz to 400 MHz +15 dBm -155 dBm/Hz 170 dB
400 MHz to 700 MHz +18 dBm -155 dBm/Hz 173 dB
700 MHz to 2.4 GHz +22 dBm -155 dBm/Hz 177 dB
2.4 GHz to 4.0 GHz +22 dBm -153 dBm/Hz 175 dB
4.0 GHz to 6.0 GHz +18 dBm -152 dBm/Hz 170 dB
6.0 GHz to 13.5 GHz +7.5 dBm -150 dBm/Hz 157 dB
13.5 GHz to 20.0 GHz +7.5 dBm -147 dBm/Hz 154 dB
20.0 GHz to 26.5 GHz +7.5 dBm -143 dBm/Hz 150 dB

*1 Difference between Third Order Intercept point (TOI) and Displayed Average Noise Level (DANL) as a simple guide


ms269xa_accuracy

Excellent Total Level Accuracy:

±0.5 dB (50 Hz ≤ f ≤ 6 GHz)

±1.8 dB (4 GHz ≤ f ≤ 13.5 GHz)

±3.0 dB (13.5 GHz ≤ f ≤ 26.5 GHz)

Conventional spectrum analyzers perform level calibration at just one frequency point, which causes errors when the frequency changes. The MS269xA Level Calibration technology assures excellent level accuracy over a wide frequency range from 50 Hz to 6 GHz even under measurement conditions including the following three errors.

The MS269xA's Total Level Accuracy includes Frequency Characteristics, Linearity and Attenuator Switching Error, where most other spectrum analyzers does not include.

The level accuracy is assured even when the frequency and attenuator are switched. Better accuracy translates to better yield and less down time.


Versatile Built-in Functions

Channel Power Spectrum Emission Mask*4 AM Depth*5
Occupied Bandwidth Spurious Emission*4 FM Deviation*5
Adjacent Channel Leakage Power Frequency Counter*4 Power Meter*6
Burst Average Power Limit Line*4 Phase Noise*7
Multi-marker & marker List 2-tone 3rd-order Intermodulation Distortion (IMD3)*4 Noise Figure*8
Highest 10 Markers
*5 Signal Analyzer Function Required *7 Phase Noise Measurement Function Required
*4 Spectrum Analyzer Function Required *6 Power Meter Function Required *8 Noise Figure Measurement Function Required
Download MS269xA Brochures for more information

Excellent Expandability Options (Future Proof Platform)

Rubidium Reference Oscillator Mobile WiMAX® Measurement Software LTE Downlink Measurement Software
Analysis Bandwidth 62.5/125 MHz W-CDMA/HSPA Downlink Measurement Software LTE-Advanced FDD Downlink Measurement Software
Phase Noise Measurement Function (standard) W-CDMA/HSPA Uplink Measurement Software LTE Uplink Measurement Software
Noise Figure Measurement Function GSM/EDGE Measurement Software LTE TDD Downlink Measurement Software
BER Measurement Function* EDGE Evolution Measurement Software LTE-Advanced TDD Downlink Measurement Software
* Requires J1373A AUX Conversion Adapter (sold separately) ETC/DSRC Measurement Software LTE TDD Uplink Measurement Software
TD-SCDMA Measurement Software
WLAN 802.11ac (160MHz) Measurement Software XG-PHS Measurement Software IQProducer™:
WLAN (802.11a/b/g/n/g/j/p) Test Software CDMA2000® Forward Link Measurement Software HSDPA/HSUPA, TDMA, Multi-Carrier, Mobile WiMAX®
Bluetooth® Test Software EV-DO Forward Link Measurement Software LTE, LTE-Advanced FDD, LTE TDD, LTE-Advanced TDD
MediaFLO Measurement Software All Measure Function (Requires MX269024A) XG-PHS, WLAN (802.11a/b/g/n/g/j/p), WLAN 802.11ac
Vector Modulation Analysis Software W-CDMA BS Measurement Software TD-SCDMA, 1xEV-DO Reverse Receiver Test Waveform Pattern

Pre-installed Patterns (Free): W-CDMA, HSDPA (Test Model5), CDMA2000® 1xEV-DO, CDMA2000®, GSM/EDGE, Digital Broadcasting (ISDB-T/CS/BS/CATV), WLAN (IEEE802.11a/b/g) and Bluetooth®

Supports modulation analysis, such as 3GPP LTE/LTE-Advanced (FDD/TDD), Mobile WiMAX®, WLAN IEEE802.11a/11b/11g/11j/11n/11p and 11ac (with optional software)

More Options information


Download MS269xA Brochures for more features


Basic Performance

Parameters / Characteristics Specifications
Frequency Frequency range 50 Hz to 6.0 GHz (MS2690A)
50 Hz to 13.5 GHz (MS2691A)
50 Hz to 26.5 GHz (MS2692A)
SSB phase noise (2 GHz) +18° to +28°C
-116 dBc/Hz (100 kHz offset)
-137 dBc/Hz (1 MHz offset)
General Dimensions and mass 340 (W) x 200 (H) x 350 (D) mm (Exclude surface projection)
≤13.5 kg (exclude other options)

Spectrum Analyzer Function

Parameters / Characteristics Specifications
Frequency Resolution bandwidth (RBW) Setting range: 30 Hz to 3 MHz (1-3 sequence), 50 kHz, 5 MHz, 10 MHz, 20 MHz, 31.25 MHz*
*Can be set when when Span is 0 Hz
Amplitude Displayed average noise level (DANL) +18° to +28°C
Detector: Sample, VBW:1 Hz (Video average), Input attenuator: 0 dB
without MS269xA-008, Preamp: Off, 6.0 GHz ≤ Frequency ≤ 26.5 GHz: without MS2692A-067
-135 dBm/Hz (100 kHz)
-145 dBm/Hz (1 MHz)
-155 dBm/Hz (30 MHz ≤ f < 2.4 GHz)
-153 dBm/Hz (2.4 GHz ≤ f < 3.0 GHz)
-153 dBm/Hz (3.0 GHz ≤ f ≤ 4.0 GHz), Frequency band mode: Normal
-152 dBm/Hz (4.0 GHz < f ≤ 6.0 GHz), Frequency band mode: Normal
-151 dBm/Hz (6.0 GHz < f ≤ 10.0 GHz), Frequency band mode: Normal
-150 dBm/Hz (10.0 GHz < f ≤ 13.5 GHz), Frequency band mode: Normal
-147 dBm/Hz (13.5 GHz < f ≤ 20.0 GHz), Frequency band mode: Normal
-143 dBm/Hz (20 GHz < f ≤ 26.5 GHz), Frequency band mode: Normal
with MS269xA-008, Preamp: On
-150 dBm/Hz (100 kHz)
-159 dBm/Hz (1 MHz)
-166 dBm/Hz (30 MHz ≤ f < 2.4 GHz)
-165 dBm/Hz (2.4 GHz ≤ f < 3.0 GHz)
-164 dBm/Hz (3.0 GHz ≤ f ≤ 4.0 GHz), Frequency band mode: Normal
-161 dBm/Hz (4.0 GHz < f ≤ 5.0 GHz), Frequency band mode: Normal
-159 dBm/Hz (5.0 GHz < f ≤ 6.0 GHz), Frequency band mode: Normal
with MS269xA-008, Preamp: Off
-135 dBm/Hz (100 kHz)
-145 dBm/Hz (1 MHz)
-153 dBm/Hz (30 MHz ≤ f < 2.4 GHz)
-152 dBm/Hz (2.4 GHz ≤ f < 3.0 GHz)
-151 dBm/Hz (3.0 GHz ≤ f ≤ 4.0 GHz), Frequency band mode: Normal
-150 dBm/Hz (4.0 GHz < f ≤ 5.0 GHz), Frequency band mode: Normal
-149 dBm/Hz (5.0 GHz < f ≤ 6.0 GHz), Frequency band mode: Normal
Total absolute amplitude accuracy +18° to +28°C
 without MS269xA-008, Preamp: Off
±0.5 dB (50 Hz ≤ f < 6 GHz, Frequency band mode: Normal)
             (50 Hz ≤ f < 3.0 GHz, Frequency band mode: Spurious)
 after Pre-selector tuning
±1.8 dB (6.0 GHz ≤ f ≤ 13.5 GHz, Frequency band mode: Normal)
             (3.0 GHz ≤ f ≤ 13.5 GHz, Frequency band mode: Spurious)
±3.0 dB (13.5 GHz ≤ f ≤ 26.5 GHz)
 with MS269xA-008, Preamp: On, Preamp input level: ≤ -20 dBm
±1.0 dB (100 kHz ≤ f ≤ 6.0 GHz, Frequency band mode: Normal)
             (100 kHz ≤ f ≤ 3.0 GHz, Frequency band mode: Spurious)
Spurious responses 2-tone 3rd-order intermodulation distortion +18° to +28°C
≥300 kHz separation without MS269xA-008, or Preamp: Off, Mixer input level: -15 dBm (per waveform)
with MS2692A-067, Microwave Pre-selector Bypass: Off
TOI = +15 dBm (30 MHz ≤ f < 400 MHz)
TOI = +18 dBm (400 MHz ≤ f < 700 MHz)
TOI = +22 dBm (700 MHz ≤ f ≤ 4.0 GHz, Frequency band mode: Normal)
                         (700 MHz ≤ f ≤ 3.0 GHz, Frequency band mode: Spurious)
TOI = +18 dBm (4.0 GHz ≤ f ≤ 6.0 GHz, Frequency band mode: Normal)
TOI = +7.5 dBm (6.0 GHz < f ≤ 26.5 GHz, Frequency band mode: Normal)
                         (3.0 GHz ≤ f ≤ 26.5 GHz, Frequency band mode: Spurious)
with MS269xA-008, Preamp: On, Preamp input leve: -45 dBm (per waveform)
TOI = -8.5 dBm (30 MHz ≤ f < 400 MHz)
TOI = -6.0 dBm (400 MHz ≤ f < 700 MHz)
TOI = -4.5 dBm (700 MHz ≤ f ≤ 4.0 GHz, Frequency band mode: Normal)
                         (700 MHz ≤ f ≤ 3.0 GHz, Frequency band mode: Spurious)
TOI = -6.0 dBm (4.0 GHz ≤ f ≤ 6.0 GHz, Frequency band mode: Normal)

Vector Signal Analysis (VSA) Function

Parameters / Characteristics Specifications
General Trace mode Spectrum, Power vs. Time, Frequency vs. Time, Phase vs. Time, CCDF, Spectrogram
Analysis bandwidth 1 kHz to 25 MHz (1-2.5-5 sequence), 31.25MHz, [without MS269xA-004]
1 kHz to 25 MHz (1-2.5-5 sequence), 31.25 MHz, 100 MHz, 125 MHz [with MS269xA-004]
1 kHz to 25 MHz (1-2.5-5 sequence), 31.25 MHz, 50 MHz, 62.5 MHz [with MS269xA-077]
1 kHz to 25 MHz (1-2.5-5 sequence), 31.25 MHz, 50 MHz, 62.5 MHz, 100 MHz, 125 MHz [with MS269xA-077/078]
Note: An image response is received when setting the bandwidth to more than 31.25 MHz.
          This can be used when not inputting a signal frequency outside the MS269xA analysis bandwidth (125 MHz max.).
          The MS2690A/91A/92A Signal Analyzer series is recommended for other measurement purposes.
Sampling rate 2 kHz to 50 MHz (1-2-5 sequence), [without MS269xA-004 or Bandwidth: ≤ 31.25 MHz]
100 MHz, 200 MHz, [with MS269xA-004 or Bandwidth: > 31.25 MHz]
100 MHz, [with MS269xA-077 or Bandwidth: > 31.25 MHz]
100 MHz, 200 MHz, [with MS269xA-077/078 or Bandwidth: > 31.25 MHz]
Maximum capture time 2 s to 2000 s (determined according to analysis bandwidth)
Spectrum displayed function Resolution bandwidth (RBW) Setting range: 1 Hz to 1 MHz (1-3 sequence), [without MS269xA-004 or Bandwidth: ≤ 31.25 MHz]
Setting range: 3 kHz to 10 MHz (1-3 sequence), [with MS269xA-004 or Bandwidth: > 31.25 MHz]
Setting range: 3 kHz to 3 MHz (1-3 sequence), [with MS269xA-077 or Bandwidth: > 31.25 MHz]
Setting range: 3 kHz to 10 MHz (1-3 sequence), [with MS269xA-077/078 or Bandwidth: > 31.25 MHz]
Displayed average noise level (DANL) +18° to +28°C
Detector: Sample, VBW:1 Hz (Video average), Input attenuator: 0 dB
without MS269xA-008, Preamp: Off, 6.0 GHz ≤ Frequency ≤ 26.5 GHz: without MS2692A-067
-132.5 dBm/Hz (100 kHz)
-142.5 dBm/Hz (1 MHz)
-152.5 dBm/Hz (30 MHz ≤ f < 2.4 GHz)
-150.5 dBm/Hz (2.4 GHz ≤ f < 3.0 GHz)
-150.5 dBm/Hz (3.0 GHz ≤ f ≤ 4.0 GHz), Frequency band mode: Normal
-149.5 dBm/Hz (4.0 GHz < f ≤ 6.0 GHz), Frequency band mode: Normal
-148.5 dBm/Hz (6.0 GHz < f ≤ 10.0 GHz), Frequency band mode: Normal
-147.5 dBm/Hz (10.0 GHz < f ≤ 13.5 GHz), Frequency band mode: Normal
-144.5 dBm/Hz (13.5 GHz < f ≤ 20.0 GHz), Frequency band mode: Normal
-140.5 dBm/Hz (20 GHz < f ≤ 26.5 GHz), Frequency band mode: Normal
with MS269xA-008, Preamp: On
-147.5 dBm/Hz (100 kHz)
-156.5 dBm/Hz (1 MHz)
-163.5 dBm/Hz (30 MHz ≤ f < 2.4 GHz)
-162.5 dBm/Hz (2.4 GHz ≤ f < 3.0 GHz)
-161.5 dBm/Hz (3.0 GHz ≤ f ≤ 4.0 GHz), Frequency band mode: Normal
-158.5 dBm/Hz (4.0 GHz < f ≤ 5.0 GHz), Frequency band mode: Normal
-156.5 dBm/Hz (5.0 GHz < f ≤ 6.0 GHz), Frequency band mode: Normal
without MS269xA-008, Preamp: Off
-132.5 dBm/Hz (100 kHz)
-142.5 dBm/Hz (1 MHz)
-150.5 dBm/Hz (30 MHz ≤ f < 2.4 GHz)
-149.5 dBm/Hz (2.4 GHz ≤ f < 3.0 GHz)
-148.5 dBm/Hz (3.0 GHz ≤ f ≤ 4.0 GHz), Frequency band mode: Normal
-147.5 dBm/Hz (4.0 GHz < f ≤ 5.0 GHz), Frequency band mode: Normal
-146.5 dBm/Hz (5.0 GHz < f ≤ 6.0 GHz), Frequency band mode: Normal
Total absolute amplitude accuracy +18° to +28°C
 Mixer input level: ≤ 0 dBm
 without MS269xA-004, or Bandwidth: ≤ 31.25 MHz
 without MS269xA-008, Preamp: Off
±0.5 dB (50 Hz ≤ f < 6 GHz, Frequency band mode: Normal)
             (50 Hz ≤ f < 3.0 GHz, Frequency band mode: Spurious)
 after Pre-selector tuning
±1.8 dB (6.0 GHz ≤ f ≤ 13.5 GHz, Frequency band mode: Normal)
             (3.0 GHz ≤ f ≤ 13.5 GHz, Frequency band mode: Spurious)
±3.0 dB (13.5 GHz ≤ f ≤ 26.5 GHz)
 with MS269xA-004, or Bandwidth: > 31.25 MHz
 without MS269xA-008, Preamp: Off
±0.5 dB (100 MHz ≤ f ≤ 6.0 GHz, Frequency band mode: Normal)
 with MS269xA-077, or with MS269xA-077/078, Bandwidth: > 31.25 MHz
 without MS269xA-008, Preamp: Off
±0.5 dB (100 MHz ≤ f ≤ 6.0 GHz, Frequency band mode: Normal)
Measure function Adjacent channel power (ACP), Channel power, Occupied bandwidth (OBW)
Digitize function Captured waveform data saved to internal HDD or output to external devices

MS2690A/91A/92A-020 Vector Signal Generator

Parameters / Characteristics Specifications
Frequency Range 125 MHz to 6.0 GHz
Resolution 0.01 Hz
Output level Setting range -140 to +10 dBm (CW), -140 to 0 dBm (Modulation)
Resolution 0.01 dB
Output level accuracy +18° to +28°C
   ±0.5 dB (125 MHz < f < 3.0 GHz)  -120 dBm ≤ p ≤ +5 dBm
   ±0.8 dB (3.0 GHz ≤ f ≤ 6.0 GHz)  -110 dBm ≤ p ≤ +5 dBm

   ±0.7 dB (125 MHz < f < 3.0 GHz)  -127 dBm ≤ p ≤ -120 dBm
   ±2.5 dB (typ.) (3.0 GHz ≤ f ≤ 6.0 GHz)  -127 dBm ≤ p ≤ -110 dBm
   ±1.5 dB (typ.) (125 MHz ≤ f ≤ 3.0 GHz)  -136 dBm ≤ p ≤ -127 dBm
Linearity 18° to 28°C,
CW, Referenced to -5 dBm output
±0.2 dB (typ., ≤3.0 GHz)  -120 dBm ≤ p ≤ -5 dBm
±0.3 dB (typ., >3.0 GHz)  -110 dBm ≤ p ≤ -5 dBm
Arbitrary waveform generator Waveform resolution 14 bits
Internal baseband reference clock Range: 20 kHz to 160 MHz, Resolution: 0.001 Hz
Waveform memory 64 Msamples
256 Msamples
RF Modulation Bandwidth 120 MHz (Pre-installed Baseband Generator)
Download MS269xA Brochures for complete specifications




Options Descriptions / Documentations
Hardware MS2690A 50 Hz to 6.0 GHz Signal Analyzer
MS2691A 50 Hz to 13.5 GHz Signal Analyzer
MS2692A 50 Hz to 26.5 GHz Signal Analyzer
MS2690A
(Hardware)
MS2690A-001 Rubidium Reference Oscillator
MS2690A-004 Wideband Analysis Bandwidth (Extends the Analysis Bandwidth to 125 MHz)
MS2690A-008 6 GHz Preamplifier (100 kHz to 6 GHz)
MS2690A-020 Vector Signal Generator (125 MHz to 6 GHz)
MS2690A-040 Baseband Interface Unit
MS2690A-050 HDD Digitizing Interface
MS2690A-077 Analysis Bandwidth Extension to 62.5 MHz
MS2690A-078 Analysis Bandwidth Extension to 125 MHz (Requires opt.077)
[Combined with MX269028A-002 Wireless LAN IEEE802.11ac (160 MHz) Measurement Software to support modulation analysis up to 160 MHz]
MS2690A-313 Removable HDD
MS2691A
(Hardware)
MS2691A-001 Rubidium Reference Oscillator
MS2691A-003 Extension of Preselector Lower Limit to 3 GHz (Extends lower limit of preselector to 3 GHz)
MS2691A-008 6 GHz Preamplifier (100 kHz to 6 GHz)
MS2691A-017 Noise Figure Measurement Function
MS2691A-020 Vector Signal Generator (125 MHz to 6 GHz)
MS2691A-040 Baseband Interface Unit
MS2691A-050 HDD Digitizing Interface
MS2691A-077 Analysis Bandwidth Extension to 62.5 MHz
MS2691A-078 Analysis Bandwidth Extension to 125 MHz (Requires opt.077)
[Combined with MX269028A-002 Wireless LAN IEEE802.11ac (160 MHz) Measurement Software to support modulation analysis up to 160 MHz]
MS2691A-313 Removable HDD
MS2692A
(Hardware)
MS2692A-001 Rubidium Reference Oscillator
MS2692A-003 Extension of Preselector Lower Limit to 3 GHz (Extends lower limit of preselector to 3 GHz)
MS2692A-008 6 GHz Preamplifier (100 kHz to 6 GHz)
MS2692A-017 Noise Figure Measurement Function
MS2692A-020 Vector Signal Generator (125 MHz to 6 GHz)
MS2692A-040 Baseband Interface Unit
MS2692A-050 HDD Digitizing Interface
MS2692A-067 Microwave Preselector Bypass
MS2692A-077 Analysis Bandwidth Extension to 62.5 MHz
MS2692A-078 Analysis Bandwidth Extension to 125 MHz (Requires opt.077)
[Combined with MX269028A-002 Wireless LAN IEEE802.11ac (160 MHz) Measurement Software to support modulation analysis up to 160 MHz]
MS2692A-313 Removable HDD
Software
(Measurement software for Signal Analyzer)
MX269010A Mobile WiMAX® Measurement Software
MX269011A W-CDMA/HSPA Downlink Measurement Software
MX269012A W-CDMA/HSPA Uplink Measurement Software
MX269013A GSM/EDGE Measurement Software
MX269013A-001 EDGE Evolution Measurement Software (Requires MX269013A)
MX269014A ETC/DSRC Measurement Software
MX269015A TD-SCDMA Measurement Software
MX269016A XG-PHS Measurement Software
MX269017A Vector Modulation Analysis Software
MX269020A LTE Downlink Measurement Software
MX269020A-001 LTE-Advanced FDD Downlink Measurement Software (Requires MX269020A)
MX269021A LTE Uplink Measurement Software
MX269022A LTE TDD Downlink Measurement Software
MX269022A-001 LTE-Advanced TDD Downlink Measurement Software (Requires MX269022A)
MX269023A LTE TDD Uplink Measurement Software
MX269024A CDMA2000® Forward Link Measurement Software
MX269024A-001 All Measure Function (Requires MX269024A)  NEW
MX269026A EV-DO Forward Link Measurement Software
MX269026A-001 All Measure Function   NEW
MX269028A WLAN (802.11) Measurement Software
MX269028A-002 802.11ac (160 MHz) Measurement Software (For MS269xA. Requires MX269028A)
MX269030A W-CDMA BS Measurement Software
MX269036A MediaFLO Measurement Software
MX269040A UMTS Measurement Software for RF Device Test
MX269041A Digital I/F Control Software for DigRF2.5G/3G
Software
(Software for waveform pattern generation for vector signal generator)
MX269901A HSDPA/HSUPA IQproducer™
MX269902A TDMA IQproducer™
MX269904A Multi-Carrier IQproducer™
MX269905A Mobile WiMAX® IQproducer™
MX269908A LTE IQproducer™
MX269908A-001 LTE-Advanced FDD Option (Requires MX269908A)
MX269909A XG-PHS IQproducer™
MX269910A LTE TDD IQproducer™
MX269910A-001 LTE-Advanced TDD Option (Requires MX269910A)
MX269911A WLAN IQproducer™
MX269911A-001 802.11ac (80 MHz) Option (Requires MX269911A)
MX269912A TD-SCDMA IQproducer™
MX269970A 1xEV-DO Reverse Receiver Test Waveform Pattern   NEW
Warranty service
(MS2690A)
MS2690A-ES2102 years Extended Warranty Service
MS2690A-ES3103 years Extended Warranty Service
MS2690A-ES5105 years Extended Warranty Service
Warranty service
(MS2691A)
MS2691A-ES2102 years Extended Warranty Service
MS2691A-ES3103 years Extended Warranty Service
MS2691A-ES5105 years Extended Warranty Service
Warranty service
(MS2692A)
MS2692A-ES2102 years Extended Warranty Service
MS2692A-ES3103 years Extended Warranty Service
MS2692A-ES5105 years Extended Warranty Service



Loading... in progress



Loading... in progress



Coming Soon..



Note: All trademarks that appear on this website are the property of their respective owners.


Need more information?

Chat with our Technical Support now !
or
Contact us by filling up our online form or email us directly at info@elecsoftsolution.com.
We will get back to your enquiry within the next business day.