- Signal Generators
- Spectrum / Signal Analyzers
- Vector Network Analyzers
- Frequency Counters
- PNT Simulation (GNSS/GPS Systems)
- Base Station Simulations
- IoT & Handset Testers
- Power Meters / Sensors
- IP / Ethernet Testers
- Conformance Test Systems
- LoRa Tester
- Digital & Analog Radio Testers
- Cable And Antenna Analyzers
- Data Acquisitions (DAQ)
- DC Electronic Loads
- DC Power Supplies / Source Measure Units
- Digital Multimeters
- Mixed-signal / Digital Oscilloscopes
- Function / Arbitrary Waveform / Pulse Generators
- Logic Analyzers
- Calibrators
- Electrolytic Capacitor Testers / Insulation Testers
- Hipot Testers / Safety Testers
- LCR Meters / Auto Transformer Test Systems
- Milliohm Testers
- Digital Power Meters
- Multifunction Power Analyzers
- Battery Testers
- Current Sensors
- Optical Spectrum Analyzers
- Amplifiers
- Antennas
- Attenuators
- Adapters & DC Blocks
- Calibration Kits & Cables
- Circulators & Isolators
- Couplers & Hybrids
- Duplexers & Multiplexers
- Filters
- Flexible Waveguides
- Limiters
- Load Terminations
- Mixers
- Phase Shifters
- Power Detectors
- Power Divider Combiners
- Rotary Joints
- Switches
- Signal Generator Synthesizers
- TR Modules
- Design & Integration
- Service & Support
- We are hiring!
Test & Measurement Instruments
RF & Microwave
AC / DC & Parametrics
Optical
RF/Microwave Components
Shielding Boxes/Enclosures/Chambers
Rigol - Spectrum / Signal Analyzers (Updated: 20 Nov 2024)
RSA5000 Series
Description
The RSA5000 real-time spectrum analyzer with real-time analysis and sweep analysis, optional vector signal analysis application software (VSA) and EMI measurement application software (EMI), with excellent performance and specifications. Its frequency range is 9kHz to 6.5GHz, and it is available with the tracking source "-TG" model, which can be widely used in enterprise R&D, factory production, education and teaching.
Built-in Vector Network Analysis mode
In VNA mode, you can make S11, S21, and DTF measurements for the components and circuit networks. The network characteristics of the components under test can be accurately demonstrated in Smith chart, Polar chart, and other formats.(*N-model ONLY)
Discover Transient Anomalies Through Ultra Real Technology
The RSA5000 delivers up to 40MHz of real-time bandwidth using the original Ultra Real technology. In the real-time bandwidth range, transient signals exceeding 7.45us duration can be guaranteed to be 100% captured and accurately measured.
Discover Problems in Design with Vector Analysis
Vector Signal Analysis Function The VSA supports a variety of digital modulation formats such as QAM, PSK, MSK, ASK, FSK, etc. This function is used to quickly demodulate and display multi-dimensional data such as its constellation, eye diagram (baseband signal), spectrogram, demodulation data, etc., to discover problems in the design.
Conduction/radiation Pre-testing with Built-in Emi Test Software
The RSA5000's built-in EMI pre-test application software, combined with CISPR-compliant filters, pre-tests the product for conduction and radiation to identify and improve its conduction/radiation disturbance source and accelerate time-to-market.
Signal Triggering and Monitoring Via FMT Template
The FMT frequency mask trigger is a unique trigger mode for real-time spectrum analyzers. You can quickly build a template and accurately locate and trigger signals that match the template rules to detect sporadic anomalies within the monitored range. You can use the RSA5000 to provide a 10.1-inch multi-touch capacitive screen for quick setup, and support a variety of gestures such as dragging, expanding, and zooming waveforms to provide a personalized interactive experience that maximizes your time.
Multiple interfaces to improve the connectivity of the instruments
The instrument can be connected to a larger display/monitor via the HDMI interface for better display effects. The Web Control function allows you to directly control the device by accessing the device IP address, improving the experience of remote control.
Quickly Complete Operations with a Multi-touch Screen
You can use the RSA5000 to provide a 10.1-inch multi-touch capacitive screen for quick setup, and support a variety of gestures such as dragging, expanding, and zooming waveforms to provide a personalized interactive experience that maximizes your time.
7 Real-time Display Modes
The RSA5000's seven real-time signal display modes make it easier to capture, isolate and analyze RF signals and systems. The power vs. time and spectrograms show how the signal varies with the acquisition time or continuous acquisition time. Combining these presentations with markers and triggers in different modes makes the RSA5000 a flexible tool for real-time RF analysis and debugging.
Excellent Phase Noise Metric
Excellent sweep performance, phase noise as low as -108dBc/Hz
Basic Performance
| Parameters / Characteristics | Specifications | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RSA5065 | RSA5032 | RSA5065-TG | RSA5032-TG | RSA5032N | RSA5065N | ||||||||||
| FREQUENCY RANGE | 9kHz~6.5GHz | 9kHz~3.2GHz | 9kHz~6.5GHz | 9kHz~3.2GHz | 9kHz~3.2GHz | 9kHz~6.5GHz | |||||||||
| DESCRIPTION | 1Hz~10MHz | ||||||||||||||
| PHASE NOISE | -108dBc/Hz@10kHz | ||||||||||||||
| DANL | -165dBm | ||||||||||||||
Checking with Rigol...
Comparison
| Model Number | Frequency Range | Max Real-Time Bandwidth | RBW | Phase Noise | DANL | Tracking Source |
|---|---|---|---|---|---|---|
|
RSA5000 Real-time spectrum analyzer
|
9kHz~6.5GHz | 40MHz | 1Hz~10MHz | -108dBc/Hz@10kHz | -165dBm | -TG/N |
RSA3000 Real-Time Spectrum Analyzers
|
9kHz~4.5GHz | 40MHz | 1Hz~10MHz | -108dBc/Hz@10kHz | -161dBm | -TG/N |
RSA3000E Real-Time Spectrum Analyzers
|
9kHz~3GHz | 10MHz | 1Hz~3MHz | -108dBc/Hz@10kHz | -161dBm | -TG |
DSA800 Spectrum Analyzers
|
9kHz~7.5GHz | - | 10Hz~1MHz | -108dBc/Hz@10kHz | -161dBm (Normalized to 1Hz) | -TG |
DSA700 Spectrum Analyzers
|
9kHz~1GHz | - | 100Hz~1MHz | -108dBc/Hz@10kHz | -130dBm (Normalized to 100Hz) | - |
Note: All trademarks that appear on this website are the property of their respective owners.
RSA3000 Series
Description
The RSA3000 real-time spectrum analyzer with real-time analysis and sweep analysis capabilities, optional EMI measurement application software (EMI), with excellent performance and specifications. Its frequency range is 9kHz to 3.2GHz, and it is available with the tracking source "-TG" model, which can be widely used in enterprise R&D, factory production, education and teaching.
Built-in Vector Network Analysis mode
In VNA mode, you can make S11, S21, and DTF measurements for the components and circuit networks. The network characteristics of the components under test can be accurately demonstrated in Smith chart, Polar chart, and other formats.(*N-model ONLY)
Conduction/Radiation Pre-compliance with Built-in Emi Test
The RSA3000's built-in EMI pre-compliance application software, combined with CISPR-compliant filters, pre-tests the product for conduction and radiation to identify and improve its conduction/radiation disturbance source and accelerate time-to-market.
Signal Triggering and Monitoring Via Fmt Mode
The FMT frequency mask trigger is a unique trigger mode for real-time spectrum analyzers. You can quickly build a template and accurately locate and trigger signals that match the template rules to detect sporadic anomalies within the monitored range.
Resolution Bandwidth As Low As 1 Hz
Resolving signals with similar frequencies is critical to verifying many RF devices and systems. With the RSA3000, the RBW resolution bandwidth with a scan bandwidth of only 1 Hz allows you to view more details of adjacent signals.
Danl As Low As -161 Dbm with Optional Preamp
View lower powered signals (harmonics, interference sources) and ease trouble-shooting in swept and real-time mode.
Multiple interfaces to improve the connectivity of the instruments
The instrument can be connected to a larger display/monitor via the HDMI interface for better display effects. The Web Control function allows you to directly control the device by accessing the device IP address, improving the experience of remote control.
Complete Operations with a Multi-touch Screen
RSA3000 with a 10.1-inch multi-touch capacitive screen with quick setup, and support a variety of gestures such as dragging, expanding, and zooming waveforms to provide a personalized interactive experience that maximizes your time.
Excellent Phase Noise Metric
Excellent sweep performance, phase noise as low as -102dBc/Hz.
Basic Performance
| Parameters / Characteristics | Specifications | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RSA3030 | RSA3030-TG | RSA3045 | RSA3045-TG | RSA3015N | RSA3030N | RSA3045N | ||||||||||
| FREQUENCY RANGE | 9kHz~3GHz | 9kHz~3GHz | 9kHz~4.5GHz | 9kHz~4.5GHz | 9kHz~1.5GHz | 9kHz~3GHz | 9kHz~4.5GHz | |||||||||
| DESCRIPTION | 1Hz~3MHz(10MHz opt.) | |||||||||||||||
| PHASE NOISE | -102dBc/Hz@10kHz | |||||||||||||||
| DANL | -161dBm | |||||||||||||||
Checking with Rigol...
Comparison
| Model Number | Frequency Range | Max Real-Time Bandwidth | RBW | Phase Noise | DANL | Tracking Source |
|---|---|---|---|---|---|---|
|
RSA5000 Real-time spectrum analyzer
|
9kHz~6.5GHz | 40MHz | 1Hz~10MHz | -108dBc/Hz@10kHz | -165dBm | -TG/N |
|
RSA3000 Real-Time Spectrum Analyzers
|
9kHz~4.5GHz | 40MHz | 1Hz~10MHz | -108dBc/Hz@10kHz | -161dBm | -TG/N |
|
RSA3000E Real-Time Spectrum Analyzers
|
9kHz~3GHz | 10MHz | 1Hz~3MHz | -108dBc/Hz@10kHz | -161dBm | -TG |
|
DSA800 Spectrum Analyzers
|
9kHz~7.5GHz | - | 10Hz~1MHz | -108dBc/Hz@10kHz | -161dBm (Normalized to 1Hz) | -TG |
|
DSA700 Spectrum Analyzers
|
9kHz~1GHz | - | 100Hz~1MHz | -108dBc/Hz@10kHz | -130dBm (Normalized to 100Hz) | - |
Note: All trademarks that appear on this website are the property of their respective owners.
RSA3000E Series
Description
The RSA3000E is a 5-in-1 spectrum analyzer with sweep spectrum, real-time spectrum, scalar network analyzer (-TG model), EMI receiver and digital demodulation. Its frequency range is 9kHz to 1.5/3GHz, and it is available with the tracking source "-TG" model, which can be widely used in enterprise R&D, factory production, education and teaching.
Conduction/Radiation Pre-compliance with Built-in Emi Test
The RSA3000E's built-in EMI pre-compliance application software, combined with CISPR-compliant filters, pre-tests the product for conduction and radiation to identify and improve its conduction/radiation disturbance source and accelerate time-to-market.
Resolution Bandwidth As Low As 1 Hz
Resolving signals with similar frequencies is critical to verifying many RF devices and systems. With the RSA3000E, the RBW resolution bandwidth with a scan bandwidth of only 1 Hz allows you to view more details of adjacent signals.
Danl As Low As -161 Dbm with Optional Preamp
View lower powered signals (harmonics, interference sources) and ease trouble-shooting in swept and real-time mode.
ASK/FSK Demodulation Analysis
ASK/FSK demodulation analysis software can help engineers demodulate and analyze signals such as TPMS, PKE/RKE, and obtain parameters of signal modulation quality to help products get listed quickly.
Excellent Phase Noise Metric
Excellent sweep performance, phase noise as low as -102dBc/Hz
Complete Operations with a Multi-touch Screen
RSA3000E with a 10.1-inch multi-touch capacitive screen with quick setup, and support a variety of gestures such as dragging, expanding, and zooming waveforms to provide a personalized interactive experience that maximizes your time.
Basic Performance
| Parameters / Characteristics | Specifications | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RSA3015E | RSA3015E-TG | RSA3030E | RSA3030E-TG | ||||||||||
| FREQUENCY RANGE | 9kHz~1.5GHz | 9kHz~1.5GHz | 9kHz~3GHz | 9kHz~3GHz | |||||||||
| DESCRIPTION | 1Hz~3MHz | ||||||||||||
| PHASE NOISE | -102dBc/Hz@10kHz | ||||||||||||
| DANL | -161dBm | ||||||||||||
Checking with Rigol...
Comparison
| Model Number | Frequency Range | Max Real-Time Bandwidth | RBW | Phase Noise | DANL | Tracking Source |
|---|---|---|---|---|---|---|
|
RSA5000 Real-time spectrum analyzer
|
9kHz~6.5GHz | 40MHz | 1Hz~10MHz | -108dBc/Hz@10kHz | -165dBm | -TG/N |
|
RSA3000 Real-Time Spectrum Analyzers
|
9kHz~4.5GHz | 40MHz | 1Hz~10MHz | -108dBc/Hz@10kHz | -161dBm | -TG/N |
|
RSA3000E Real-Time Spectrum Analyzers
|
9kHz~3GHz | 10MHz | 1Hz~3MHz | -108dBc/Hz@10kHz | -161dBm | -TG |
|
DSA800 Spectrum Analyzers
|
9kHz~7.5GHz | - | 10Hz~1MHz | -108dBc/Hz@10kHz | -161dBm (Normalized to 1Hz) | -TG |
|
DSA700 Spectrum Analyzers
|
9kHz~1GHz | - | 100Hz~1MHz | -108dBc/Hz@10kHz | -130dBm (Normalized to 100Hz) | - |
Note: All trademarks that appear on this website are the property of their respective owners.
DSA800 Series
Description
Performance Spectrum Analyzers with exceptional capabilities and an affordable price 1.5 GHz to 7.5 GHz models with tracking generators, Preamps, EMI, VSWR, and more option.
10Hz Resolution Bandwidth
The DSA800 withl RF technology to provide a resolution bandwidth as low as 10 Hz, which can effectively distinguish adjacent equal-amplitude signals and improve signal discrimination.
DANL: -161 Dbm with Optional Preamp
View lower powered signals (harmonics, interference sources) and ease trouble-shooting in swept and real-time mode.
EMI Pre-compliance Measurement
EMI filter (6 dB) and quasi-peak detectors make EMI pre-test/diagnostics more accurate, complete with complete software and report generation.
Tracking Source and VSWR Function
DSA800 series with VSWR measurement capability, with tracking source model (-TG), with VSWR bridge for voltage standing wave ratio test.
UnltraSpectrum Software
The optional UltraSpectrum software can not only complete the control of the spectrum analyzer, but also provide powerful display and analysis functions such as spectrum and waterfall.
Basic Performance
| Parameters / Characteristics | Specifications | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DSA815 | DSA815-TG | DSA875-TG | DSA875 | DSA832-TG | DSA832 | DSA832E | DSA832E-TG | ||||||||||
| FREQUENCY RANGE | 9kHz~1.5GHz | 9kHz~1.5GHz | 9kHz~7.5GHz | 9kHz~7.5GHz | 9kHz~3.2GHz | 9kHz~3.2GHz | 9kHz~3.2GHz | 9kHz~3.2GHz | |||||||||
| DESCRIPTION | 10Hz~1MHz | ||||||||||||||||
| PHASE NOISE | -80dBc/Hz@10kHz | -80dBc/Hz@10kHz | -98dBc/Hz@10kHz | -98dBc/Hz@10kHz | -98dBc/Hz@10kHz | -98dBc/Hz@10kHz | -90dBc/Hz@10kHz | -90dBc/Hz@10kHz | |||||||||
| DANL | -155dBm (Normalized to 1Hz) | -155dBm | -161dBm | -161dBm (Normalized to 1Hz) | -161dBm | -161dBm (Normalized to 1Hz) | -161dBm (Normalized to 1Hz) | -161dBm (Normalized to 1Hz) | |||||||||
Checking with Rigol...
Comparison
| Model Number | Frequency Range | Max Real-Time Bandwidth | RBW | Phase Noise | DANL | Tracking Source |
|---|---|---|---|---|---|---|
|
RSA5000 Real-time spectrum analyzer
|
9kHz~6.5GHz | 40MHz | 1Hz~10MHz | -108dBc/Hz@10kHz | -165dBm | -TG/N |
|
RSA3000 Real-Time Spectrum Analyzers
|
9kHz~4.5GHz | 40MHz | 1Hz~10MHz | -108dBc/Hz@10kHz | -161dBm | -TG/N |
|
RSA3000E Real-Time Spectrum Analyzers
|
9kHz~3GHz | 10MHz | 1Hz~3MHz | -108dBc/Hz@10kHz | -161dBm | -TG |
|
DSA800 Spectrum Analyzers
|
9kHz~7.5GHz | - | 10Hz~1MHz | -108dBc/Hz@10kHz | -161dBm (Normalized to 1Hz) | -TG |
|
DSA700 Spectrum Analyzers
|
9kHz~1GHz | - | 100Hz~1MHz | -108dBc/Hz@10kHz | -130dBm (Normalized to 100Hz) | - |
Note: All trademarks that appear on this website are the property of their respective owners.
DSA700 Series
Description
The optional UltraSpectrum software can not only complete the control of the spectrum analyzer, but also provide powerful display and analysis functions such as spectrum and waterfall.
Down to 10Hz Minimum Resolution Bandwidth (RBW)
Provides high resolution to separate signals with similar frequencies enabling easier signal identification
EMI PreCompliance Measurements (Option)
The DSA700 has an EMI filter (6 dB) and a quasi-peak detector to make EMI pre-test/diagnostics more accurate, and complete test and report generation using the host computer software S1210.
Excellent Noise Floor Reduction for Weak Signal Testing
Testing of weak signals is susceptible to the noise floor of the spectrum analyzer itself. The DSA700 series displays an average noise level as low as -130dBm (normalized to 100Hz), which effectively guarantees the ability to test weak signals.
ASK/FSK Signal Capture with Fast Capture
ASK/FSK modulation is usually used for car remote control keys, TPMS tire pressure modules and small wireless modules. The DSA700 can perform ASK/FSK signal capture through the SSC-DSA function extension, and has built-in 2FSK test function to directly obtain parameters such as center frequency, power and offset.
Basic Performance
| Parameters / Characteristics | Specifications | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| DSA705 | DSA710-TG | ||||||||||
| FREQUENCY RANGE | 100kHz~500MHz | 100kHz~1GHz | |||||||||
| DESCRIPTION | 10Hz~1MHz | ||||||||||
| PHASE NOISE | -80dBc/Hz@10kHz | ||||||||||
| DANL | -130dBm (Normalized to 100Hz) | ||||||||||
Checking with Rigol...
Comparison
| Model Number | Frequency Range | Max Real-Time Bandwidth | RBW | Phase Noise | DANL | Tracking Source |
|---|---|---|---|---|---|---|
|
RSA5000 Real-time spectrum analyzer
|
9kHz~6.5GHz | 40MHz | 1Hz~10MHz | -108dBc/Hz@10kHz | -165dBm | -TG/N |
|
RSA3000 Real-Time Spectrum Analyzers
|
9kHz~4.5GHz | 40MHz | 1Hz~10MHz | -108dBc/Hz@10kHz | -161dBm | -TG/N |
|
RSA3000E Real-Time Spectrum Analyzers
|
9kHz~3GHz | 10MHz | 1Hz~3MHz | -108dBc/Hz@10kHz | -161dBm | -TG |
|
DSA800 Spectrum Analyzers
|
9kHz~7.5GHz | - | 10Hz~1MHz | -108dBc/Hz@10kHz | -161dBm (Normalized to 1Hz) | -TG |
|
DSA700 Spectrum Analyzers
|
9kHz~1GHz | - | 100Hz~1MHz | -108dBc/Hz@10kHz | -130dBm (Normalized to 100Hz) | - |
Note: All trademarks that appear on this website are the property of their respective owners.