- Signal Generators
- Spectrum / Signal Analyzers
- Vector Network Analyzers
- Frequency Counters
- PNT Simulation (GNSS/GPS Systems)
- Base Station Simulations
- IoT & Handset Testers
- Power Meters / Sensors
- IP / Ethernet Testers
- Conformance Test Systems
- LoRa Tester
- Digital & Analog Radio Testers
- Cable And Antenna Analyzers
- Data Acquisitions (DAQ)
- DC Electronic Loads
- DC Power Supplies / Source Measure Units
- Digital Multimeters
- Mixed-signal / Digital Oscilloscopes
- Function / Arbitrary Waveform / Pulse Generators
- Logic Analyzers
- Calibrators
- Electrolytic Capacitor Testers / Insulation Testers
- Hipot Testers / Safety Testers
- LCR Meters / Auto Transformer Test Systems
- Milliohm Testers
- Digital Power Meters
- Multifunction Power Analyzers
- Battery Testers
- Current Sensors
- Optical Spectrum Analyzers
- Amplifiers
- Antennas
- Attenuators
- Adapters & DC Blocks
- Calibration Kits & Cables
- Circulators & Isolators
- Couplers & Hybrids
- Duplexers & Multiplexers
- Filters
- Flexible Waveguides
- Limiters
- Load Terminations
- Mixers
- Phase Shifters
- Power Detectors
- Power Divider Combiners
- Rotary Joints
- Switches
- Signal Generator Synthesizers
- TR Modules
- Design & Integration
- Service & Support
- We are hiring!
Test & Measurement Instruments
RF & Microwave
AC / DC & Parametrics
Optical
RF/Microwave Components
Shielding Boxes/Enclosures/Chambers
Suita - Digital Power Meters (Updated: 20 Nov 2024)
SPA1000
Description
SPA1000 is a cost-effective solution with a wide range of current measurements for all AC and DC parameters, and performs integral and harmonic measurements without the need to switch measurement modes, making measurements more convenient and efficient.
Simultaneous parameter measurement
All AC and DC parameters can be measured, and integral and harmonic measurements can be conducted simultaneously without the need to switch measurement modes.
Computing function
SPA1000 supports a variety of computation functions, enabling the display of peak factors, arithmetic operation results, and average active power.
Wide current and voltage measurement range
Current measurement ranging from one to tens of amperes, and voltage measurement ranging from 6V to 1,000V. SPA1000 can not only be utilized for current/voltage measurement in a single procedure but can also track current/voltage fluctuations across a wide dynamic range when electrical equipment transitions from standby to power-on. All of this can be accomplished with a single power meter and a single module.
Fast signal display and automatic updates
The fast display function is accessible, with a data update rate of up to 50ms. This accelerates the testing process, saving users time. When the automatic rate updating mode is activated, it can track frequency signals as low as 0.1Hz, and the data update rate is automatically adjusted based on the frequency of the input signal. This enables more precise measurement of frequency variations.
Basic Performance
| Parameters / Characteristics | Description |
|---|---|
| Measurement Accuracy | ± (0.1% of reading + 0.05% of range) |
| Voltage Range | 6V - 1000V |
| Current Range | 5mA - 20A |
| Measurement Bandwidth | DC, 0.1Hz - 100kHz |
| Sampling Rate | up to 100kS/s |
| Resolution | 16-Bit |
| Channels | 1 |
| Harmonic Measurements | up to 100th order |
| Internal Storage | None |
| Programming and Interfaces | USB, Ethernet, RS-232, GPIB (optional), D/A output |
Checking with Suita...
Comparison
| Model Number | Measurement Accuracy | Voltage Range | Current Range | Measurement Bandwidth | Sampling Rate | Resolution | Channels |
|---|---|---|---|---|---|---|---|
|
SPA1000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 6V - 1000V | 5mA - 20A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 1 |
SPA2000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 6V - 1000V | 1A - 50A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 1 |
SPA3000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1000V | 500mA - 20A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
SPA3100 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1500V | 100mA - 5A | DC, 0.5Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
SPA3200 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1500V | 1A - 50A | DC, 0.5Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
Note: All trademarks that appear on this website are the property of their respective owners.
SPA2000
Description
SPA2000 digital power meter offers a wider current and voltage measurement range, accurately capturing parameters for most electrical devices without the need to switch measurement modes. This seamless integration of integral and harmonic measurements makes the process more convenient and efficient.
Simultaneous parameter measurement
All AC and DC parameters can be measured, and integral and harmonic measurements can be conducted simultaneously without the need to switch measurement modes.
Computing function
SPA2000 supports a variety of computation functions, enabling the display of peak factors, arithmetic operation results, and average active power.
Wide current and voltage measurement range
Current measurement ranging from one to tens of amperes, and voltage measurement ranging from 6V to 1,000V. SPA2000 can not only be utilized for current/voltage measurement in a single procedure but can also track current/voltage fluctuations across a wide dynamic range when electrical equipment transitions from standby to power-on. All of this can be accomplished with a single power meter and a single module.
Fast signal display and automatic updates
The fast display function is accessible, with a data update rate of up to 50ms. This accelerates the testing process, saving users time. When the automatic rate updating mode is activated, it can track frequency signals as low as 0.1Hz, and the data update rate is automatically adjusted based on the frequency of the input signal. This enables more precise measurement of frequency variations.
Basic Performance
| Parameters / Characteristics | Description |
|---|---|
| Measurement Accuracy | ± (0.1% of reading + 0.05% of range) |
| Voltage Range | 6V - 1000V |
| Current Range | 1A - 50A |
| Measurement Bandwidth | DC, 0.1Hz - 100kHz |
| Sampling Rate | up to 100kS/s |
| Resolution | 16-Bit |
| Channels | 1 |
| Harmonic Measurements | up to 100th order |
| Internal Storage | None |
| Programming and Interfaces | USB, Ethernet, RS-232, GPIB (optional), D/A output |
Checking with Suita...
Comparison
| Model Number | Measurement Accuracy | Voltage Range | Current Range | Measurement Bandwidth | Sampling Rate | Resolution | Channels |
|---|---|---|---|---|---|---|---|
|
SPA1000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 6V - 1000V | 5mA - 20A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 1 |
|
SPA2000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 6V - 1000V | 1A - 50A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 1 |
|
SPA3000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1000V | 500mA - 20A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
|
SPA3100 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1500V | 100mA - 5A | DC, 0.5Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
|
SPA3200 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1500V | 1A - 50A | DC, 0.5Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
Note: All trademarks that appear on this website are the property of their respective owners.
SPA3000
Description
SPA3000 Digital Power Meter can measure all AC and DC parameters. It can conduct integral and harmonic measurements simultaneously without the need to switch measurement modes.
Simultaneous parameter measurement
SPA3000 Digital Power Meter can measure all AC and DC parameters. It can conduct integral and harmonic measurements simultaneously without the need to switch measurement modes. Harmonics can be measured up to 50th order.
Parameter configuration saving and loading
SPA3000 enables users to save configuration files, facilitating the swift loading of previously saved configurations. This feature minimizes the need for redundant parameter configuration when encountering similar measurement conditions in the future.
Comparator function
SPA3000 can compare measurements with pre-set values, and according to the comparison result, output the voltage value of +5V, 0, and -5V.
Multiple computing function
SPA3000 supports a variety of computation functions, enabling the display of efficiency, peak factors, arithmetic operation results, and average active power.
SUITA PM Viewer
SUITA PM Viewer is a PC application software that allows users to connect their devices to a PC through a network interface, enabling remote control from the PC. Measured data, waveforms, trends, and bar graphs can be conveniently displayed on the PC's monitor, providing a visual representation of the information.
Basic Performance
| Parameters / Characteristics | Description |
|---|---|
| Measurement Accuracy | ± (0.1% of reading + 0.05% of range) |
| Voltage Range | 15V - 1000V |
| Current Range | 500mA - 20A |
| Measurement Bandwidth | DC, 0.1Hz - 100kHz |
| Sampling Rate | up to 100kS/s |
| Resolution | 16-Bit |
| Channels | 3 |
| Harmonic Measurements | up to 100th order |
| Internal Storage | 4GB |
| Programming and Interfaces | USB, Ethernet, RS-232, GPIB (optional), D/A output |
Checking with Suita...
Comparison
| Model Number | Measurement Accuracy | Voltage Range | Current Range | Measurement Bandwidth | Sampling Rate | Resolution | Channels |
|---|---|---|---|---|---|---|---|
|
SPA1000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 6V - 1000V | 5mA - 20A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 1 |
|
SPA2000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 6V - 1000V | 1A - 50A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 1 |
|
SPA3000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1000V | 500mA - 20A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
|
SPA3100 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1500V | 100mA - 5A | DC, 0.5Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
|
SPA3200 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1500V | 1A - 50A | DC, 0.5Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
Note: All trademarks that appear on this website are the property of their respective owners.
SPA3100
Description
SPA3100 is widely used for power industry testing, office or home appliance power consumption measurement, and battery-driven device assessment, etc. SPA3100 is small-sized, compact, user-friendly, affordable, and of high precision. Its built-in 5.6" LCD screen offers a brighter and more uniform display effect compared to regular LCD screens while having a higher energy eficiency. SPA3100 has a voltage range of 15-1000V and a current range of 0.25-5A, meeting most of the electrical equipment measurement range for swift and accurate results.
5.6-inch LCD Touchscreen
The LCD screen ensures clear pixel representation, vibrant colors, and realistic images. Additionally, the LCD screen has a lower power consumption, ensuring stable and enduring operation. In comparison to LED screens, LCD screens are more compact, lightweight, and portable. Furthermore, the LCD screen offers a wider viewing angle for an enhanced visual experience.
Simultaneous parameter measurement
SPA3100 Digital Power Meter can measure all AC and DC parameters. It can conduct integral and harmonic measurements simultaneously without the need to switch measurement modes. Harmonics can be measured up to 50th order.
Parameter configuration saving and loading
SPA3100 enables users to save configuration files, facilitating the swift loading of previously saved configurations. This feature minimizes the need for redundant parameter configuration when encountering similar measurement conditions in the future.
Multiple computing function
SPA3100 supports a variety of computation functions, enabling the display of efficiency, peak factors, arithmetic operation results, and average active power.
SUITA PA Viewer
SUITA PA Viewer is a PC application software that allows users to connect their devices to a PC through a network interface, enabling remote control from the PC. Measured data, waveforms, trends, and bar graphs can be conveniently displayed on the PC's monitor, providing a visual representation of the information.
Basic Performance
| Parameters / Characteristics | Description |
|---|---|
| Measurement Accuracy | ± (0.1% of reading + 0.05% of range) |
| Voltage Range | 15V - 1500V |
| Current Range | 100mA - 5A |
| Measurement Bandwidth | DC, 0.5Hz-100KHz |
| Resolution | 16-Bit |
| Channels | 3 |
| Internal Storage | 4GB |
| Programming and Interfaces | USB, Ethernet, RS-232, GPIB (optional), D/A output |
Checking with Suita...
Comparison
| Model Number | Measurement Accuracy | Voltage Range | Current Range | Measurement Bandwidth | Sampling Rate | Resolution | Channels |
|---|---|---|---|---|---|---|---|
|
SPA1000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 6V - 1000V | 5mA - 20A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 1 |
|
SPA2000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 6V - 1000V | 1A - 50A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 1 |
|
SPA3000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1000V | 500mA - 20A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
|
SPA3100 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1500V | 100mA - 5A | DC, 0.5Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
|
SPA3200 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1500V | 1A - 50A | DC, 0.5Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
Note: All trademarks that appear on this website are the property of their respective owners.
SPA3200
Description
SPA3200 Digital Power Meter has multiple measurement channels and wide current range which can measure voltage, current and power consumption of the measured devices with high power and precision. The semi-rack design makes it suitable for power consumption test bench and automated assembly line testing. In addition, the device is equipped with a multi-channel D/A output and extensive I/O ports, allowing technicians to adopt the solution to the specific application.
5.6-inch LCD Touchscreen
The LCD touchscreen ensures clear pixel representation, vibrant colors, and realistic images. Additionally, the LCD screen has a lower power consumption, ensuring stable and enduring operation. In comparison to LED screens, LCD screens are more compact, lightweight, and portable. Furthermore, the LCD screen offers a wider viewing angle for an enhanced visual experience.
Simultaneous parameter measurement
SPA3200 Digital Power Meter can measure all AC and DC parameters. It can conduct integral and harmonic measurements simultaneously without the need to switch measurement modes.
Parameter configuration saving and loading
SPA3200 enables users to save configuration files, facilitating the swift loading of previously saved configurations. This feature minimizes the need for redundant parameter configuration when encountering similar measurement conditions in the future.
Multiple computing function
SPA3200 supports a variety of computation functions, enabling the display of efficiency, peak factors, arithmetic operation results, and average active power.
SUITA PA Viewer
SUITA PA Viewer is a PC application software that allows users to connect their devices to a PC through a network interface, enabling remote control from the PC. Measured data, waveforms, trends, and bar graphs can be conveniently displayed on the PC's monitor, providing a visual representation of the information.
Basic Performance
| Parameters / Characteristics | Description |
|---|---|
| Measurement Accuracy | ± (0.1% of reading + 0.05% of range) |
| Voltage Range | 15V - 1500V |
| Current Range | 1A - 50A |
| Measurement Bandwidth | DC, 0.5Hz-100KHz |
| Resolution | 16-Bit |
| Channels | 3 |
| Internal Storage | 4GB |
| Programming and Interfaces | USB, Ethernet, RS-232, GPIB (optional), D/A output |
Checking with Suita...
Comparison
| Model Number | Measurement Accuracy | Voltage Range | Current Range | Measurement Bandwidth | Sampling Rate | Resolution | Channels |
|---|---|---|---|---|---|---|---|
|
SPA1000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 6V - 1000V | 5mA - 20A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 1 |
|
SPA2000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 6V - 1000V | 1A - 50A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 1 |
|
SPA3000 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1000V | 500mA - 20A | DC, 0.1Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
|
SPA3100 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1500V | 100mA - 5A | DC, 0.5Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
|
SPA3200 Digital Power Meter
|
± (0.1% of reading + 0.05% of range) | 15V - 1500V | 1A - 50A | DC, 0.5Hz - 100kHz | up to 100kS/s | 16-Bit | 3 |
Note: All trademarks that appear on this website are the property of their respective owners.